The Server Project Begins

I [finally] get Mac OS X 1.4 Server and start to plan for installation and deployment.

If you’ve been following this bLog, you know that I recently purchased Mac OS X 10.4 Server from someone on eBay. I got the software at a smoking price — less than the Apple employee discount, in fact — and considered myself very fortunate. The only thing I can’t figure out is why it took the seller more than 10 days to send the software to me in a flat rate Priority Mail box.

The software arrived in good condition. The box looked a little worn, as if it had been handled by too many people or shuffled around from one shelf to another. But the seals were intact and the box appears to contain all the discs, documentation, and proof of purchase info — including the all-important serial number — that a legal copy of the software should. So I’m pretty confident that I did not buy used or pirated software.

Now that I have the software, I have no excuse to put off my big server project.

The goal, as I think I’ve mentioned elsewhere, is to install Mac OS X 10.4 server on my current Web server machine and use the following features:
– Web server (Apache) with PHP and MySQL for dynamic content
– E-mail server
– Mailing List server
– FTP server
– Streaming Video (QuickTime)
– Blog

I’ll also set up secure space on the server to back up my own personal documents, as well as Mike’s.

In addition to all that, the server will continue to run the same other services the server runs now:
– FileMaker Pro databases
– Webcam
– Steaming Audio (for KBSZ-AM)

All this on a Power Macintosh G4 running at 866 MHz. Seems pretty ambitious, but we’ll see how I can do. If all else fails, I’ll take my old G3/300 (beige, mind you) out of retirement and use that for the Webcam and FileMaker Pro databases.

I’ve made a list of steps that need to be done to get the project going. Here’s what I hope to accomplish today:

1) Adjust the upload address for all Webcams. Although the KBSZ-AM Webcam currently uploads to some GoDaddy hosting space I have, I think the wickenburg-az.com and Editor SpyCam Webcams both upload to my current server. I need them to upload someplace that won’t be affected by the change — probably that GoDaddy space — so I don’t lose Webcam service. I also need to adjust all Web page references to that new space.

2) Adjust the file locations for the ini files I use to display sunrise/sunset and upcoming event info on various Web sites. This information is generated each morning as a text file that is inserted in the appropriate locations on various Web pages. I need to change the source location for the ini files in the Web page HTML and then set up an AppleScript that automatically uses Fetch to move the files where I said they’ll be right after the files are created.

3) Set up hosting on the GoDaddy server for the Web sites I host on my server. This is temporary and will give me the time I need to make all the changes on the new server before moving the sites back. Some sites will move over without any major changes. Other sites, like wickenburg-az.com and aneclecticmind.com will undergo complete facelifts using new features available to me in Apache and the blogging software that comes with Mac OS X 10.4 Server. By moving them off my server to a place where they’ll continue to be served without interruption, I won’t be rushed to build the new sites. Some will be at GoDaddy for less than a month; others might be there for several months.

Since it’ll take up to 48 hours for the DNS info on the Web site move to propogate, I’ll have to wait a few days after I finish these steps to move onto the next step. Hopefully, while I’m waiting, the new RAM will arrive. I’d already ordered and installed 512 MB of RAM on the server and quickly discovered that the RAM was bad. When I get the new RAM, I’ll install it and send back the bad RAM. It should arrive today. If this RAM doesn’t work, I can only assume that they sold me the wrong kind of RAM.

When I’m sure that the sites are being served from GoDaddy’s servers, I can move on with the next steps in the project. I’ll write about those later on.

Stay tuned for progress reports, including problems I’m sure to encounter. And wish me luck!

Snagged the Server!

Another eBay success.

I managed to win an auction for a copy of Mac OS 10.4 Tiger Server Unlimited. Apple sells this for $995; I got it for $449 including shipping. According to the seller, it’s in an unopened box, so it sounds legal to me.

I’m excited about this. I’ve been sitting on the fence about switching to Mac OS X server for about two years now, but my recent dealings with the folks who sell WebSTAR made me decide to take the big step up. I run a bunch of Web sites on the G4 in my office. I also run a FileMaker Pro database Web publishing server, Webcam software, and audio streaming software.

I used to run e-mail there, too, but the IP address I had was somehow linked to a spam account and all my e-mail was getting bounced from the sender as spam. What a hassle that was. So I moved my theflyingm.com domain name to a GoDaddy.com server and use that for e-mail and hosting my podcasting files. Although I now have a different IP address, I think I’ll keep theflyingm.com on GoDaddy’s server. They offer a ton of bandwidth for a very affordable price.

Now, I need to come up with a plan of attack for the new server. I want to take my time about setting it up, so I’ll probably start by moving all the Web sites I host over to GoDaddy.com for a month. Then I’ll set up my new server’s features, step-by-step, and get the Web sites all in place. I’ll “flick the switch” back to my server and, with luck, there won’t be any service interruption at all.

Those of you reading this who don’t know about GoDaddy.com and have a need for domain name registration or Web site hosting should really check them out. They’re affordable and reliable and have excellent free technical support by phone. (E-mail tech support stinks.) They also have a lot of how-to documents on the site to answer the easy questions.

Speaking of how-to documents, I got an answer to my MIME Mapping question that pointed me to a file named .htaccess. A Google search got me the information I needed from the JavaScriptKit Web site’s Web Building Tutorials pages. I think this will be a gold mine of information for me as I work directly with a Unix-based Web server for the first time.

As I work my way through this project, I’ll probably report my progress here and provide detailed how-to information in the companion Web site for my Mac OS books — that’s where most readers interested in this kind of stuff are mostly likely to look for how-to information from me.

Oddly enough, I haven’t felt this excited about a computer project for a long time. I’m really looking forward to the challenge and to learning the new things that’ll make it all work.

Oh, and the good news is that I didn’t win the other hard disk auction.

An Excellent Weekend

And it ain’t over yet.

Flying M Air’s second big weekend of the season started on Friday morning, with a call from a man who wanted to charter the helicopter. The weather was cloudy and it had rained earlier in the morning. Although he wanted to go to Sedona with his daughter, he’d settle for Tucson. He decided to wait and see what the weather was like closer to noon.

When I hung up, I started doing some research on the weather. There’s no weather forecast specifically for Sedona, but I checked Flagstaff and Prescott, which are on either side of Sedona. (Sedona is closer to Flag.) Things in Flag didn’t look good. Clouds, thunderstorms, wind with gust up to 27. It looked like there might be a window of opportunity (so to speak) between 11 AM and about 3 PM. But even that was suspect — a forecast like the one I was reading usually doesn’t hold out. It seemed to me that multiple weather systems were going through the area, west to east, and that anything could happen.

But ceilings were forecast high enough for me to fly. I only need 500 feet AGL to get from point A to Point B — “clear of clouds” is what the weather minimums say for helicopters — and the forecast told of clouds at 2,000 feet AGL. That’s certainly enough room for me to move around beneath them.

Things looked better at Prescott. Higher clouds, earlier clearing, less talk of T-storms and wind gusts. But of course, Sedona is closer to Flag.

I worked for a while on my QuickBooks book, did some e-mail, goofed off on eBay. Then I got a call from Stan, who was back from a trip to Portugal. Stan’s Latte Cafe — my nickname for his hangar and its professional espresso machine — was opening for business in a while. Did I feel like a Latte? I certainly didn’t feel like working. So I hopped in the Honda (which I’d just picked up from a nice detailing that morning) and sped on over to the airport.

I wasted a good hour there, then headed over to my hangar to do some paperwork and collect the camera mount I’d bought for the helicopter. I wasn’t happy with the way the mount attached and had thoughts of going to Benner-Nauman (the local fabrication place) and having a custom piece built. I also had to drive out to Congress to put up some posters for the $25 helicopter rides I planned the next day.

I was just heading out toward Congress when my potential customer called again. I told him what I’d learned about the weather, but added that I’d checked more than two hours ago and the forecast could have changed. He was very interested in Sedona and I was very interested in taking him. He and his daughter, who were from out of town, had driven up I-17 as far as Carefree Highway and he wanted to know whether there was somewhere around there that I could pick them up. I told him about Turf Soaring School, near Carefree Highway, and he said they’d head over there. I told him I’d check the weather again and get ready. If he didn’t hear from me, I’d meet him at 2 PM or sooner.

That began a flurry of activity. Checking weather (which did indeed look better), creating my Part 135 flight plan, filing two flight plans with the FAA (one for each leg of the trip), picking up Alex at work, bringing him home, dressing in something more appropriate for flying customers around, pulling the helicopter out of the hangar, fueling up, preflighting, starting up, warming up, and flying down to Turf.

Turf is about 30 miles from Wickenburg and I made it there in .3 hours. I got there 1:45 PM, set down, cooled down, and shut down. My customer, Tony, and his daughter, Angela, were pleasant people who had already flown many times in R44s. Tony, in fact, was a part owner of one and, with his partner and a flight instructor, operated a small flight school in the Detroit area where he lived. After a quick safety briefing, we climbed aboard. Tony volunteered to sit in back. I didn’t think he’d have enough room back there — he was a pretty big guy — but he later told me that the back seat was very comfortable and had good visibility. (It was his first time in the back; I’ve still never sat in the back of an R44.)

We flew to Sedona via Lake Pleasant and I-17. My passengers found the flight interesting — the terrain was so different from their home. The further north we got, the cloudier it got. We could see rain showers off to our right or left and flew through some rain once right before reaching Sedona. The ceilings were high enough and the air was pretty smooth, considering the look of those low, puffy clouds. Things at Sedona were pretty quiet — it was, after all, a Friday, and clouds tend to scare off most Arizona pleasure pilots. I called the FBO for a taxi as I set down on the helipad and the FBO guy came out in a pickup truck to get my passengers. I walked to the terminal in the light drizzle that was falling. My passengers were already gone when I got there.

I ordered fuel, said hello to the few folks I remembered from my back-to-back Sedona flights in late July, and headed over to the restaurant. It was the first time I ever sat inside there. Usually, I sit out on the patio in the shade. But the rain had closed down the patio. I settled down with my book (I’m currently reading The Name of the Rose) and had lunch. Tony would call when they were ready to come back, sometime around 4 PM.

They didn’t last that long. I’d just finished lunch when he called. He said the taxi would take them right to the helicopter, so I hustled up to pay for lunch, pay for fuel (which was actually cheaper than in Wickenburg), and head out to the helicopter.

I had just finished stowing my stuff and checking the oil when my cell phone rang. It was my contact at one of the local guest ranches. She had five people who wanted desperately to go to the Grand Canyon. Could I help? I made a phone call to try to get a second helicopter to take the extra two guests. Then we climbed on board and, after a quick tour of Sedona’s red rocks — looking dramatic but not terribly red in the cloudy weather — headed back to Turf.

After dropping off my passengers (and collecting payment), I flew right back to Wickenburg. It was after 5 PM when I set down on one of the helipads. I was driving home when I started checking messages on my cell phone. My contact at the ranch had called again. So had the guy I’d called to try to get another helicopter. I waited until I got home, then called the guy to get the helicopter story first. Because they’d have to ferry the helicopter from their base of operations (30 minutes from Wickenburg), it would cost my passengers $2,700 for the round trip flight from Wickenburg to the Grand Canyon. Ouch!!! Their hourly rate was $550 (for comparison, I get $395 from Wickenburg and $495 from the Valley but don’t charge for ferry time) and they expected it to take 2.5 hours each way. I charge a flat rate of $995 from Wickenburg to the Grand Canyon and back. So the total, including tax, for both helicopters would be nearly $4,000. For five people. And neither of us were allowed to fly over the canyon (at reasonable altitudes), so the passengers would still have to shell out $75 per person for their tours. Egads.

I called my contact at the ranch and gave her the bad news. She was appalled. I think she realized what a good deal Flying M Air offers passengers. She said she didn’t think the passengers would go for it, but she also said that they were willing to have just 3 passengers go to the canyon. I told her I’d plan on it then and that I’d call her in the morning for the weights and names I needed for my Part 135 manifest.

I called and told the helicopter guy that it was a no-go for him. I also told him that they might want to consider coming up with some kind of industry rate so I could use them in the future. $550 per hour with $550 going right to ferry time is insane.

Then I had to juggle my schedule. The first thing that had to go was the $25 helicopter rides in Congress. It wasn’t a real planned event and no one was really expecting me there. I just thought I’d spend a few hours on the side of the road at the intersection of 71 and 89 with signs up to see how I could do. If I didn’t fly, fine. I had a book to read. And fortunately, I never had an opportunity to put out the posters. But I couldn’t reach my contact by phone because I couldn’t find his phone number in the book. He’s probably still wondering what the hell happened to me.

In the afternoon, I’d been scheduled to help out BC Jeep Tours, the local Jeep tour operator, with a big party they had from the same ranch. I called and asked if Mike could drive instead of me. He’s a better Jeep driver anyway, I told them (and it’s probably true). Cathy said it would be fine and wished me luck on my big charter. Poor Mike was leading a horseback ride in the morning for the Wickenburg Horsemen’s Association. After the ride, he’d have to hurry home with the horses, skipping the lunch they’d planned, so he could be cleaned up, dressed, and in the Jeep at the ranch by 1:30 at the latest.

The next morning, I called my contact at the ranch and got the information I needed about the passengers. If the weights were right (and they weren’t), I’d have a light load. But I never believe weights and assumed they’d weigh more. (Of course, they wound up weighing even more than that, but Zero-Mike-Lima could handle it.) I did all my flight planning and FAA-required stuff, then headed out to the airport.

Stan’s Latte Cafe was open and I joined the crowd there for a latte. Then I preflighted the helicopter, started it up, and flew it over to the fuel island for fuel. Normally, I wouldn’t fly it, but I figured that would be a good way to shorten up the startup time by having the engine pre-warmed before the passengers arrived. The ranch van pulled up to the airport as the fueler was finishing up. I greeted them in the terminal and showed them, on the big chart, where we were going. That’s also when I realized that they were a bit heavier than I’d been told. I was glad I’d taken on less fuel than the flight planning said I could.

My passengers were three German men. One man spoke English very well and was accompanied by his grown son. The other man didn’t speak English very well at all. But all were friendly and in good spirits. I gave them the safety briefing, speaking slowly and using lots of hand motions to make sure they’d all understand. Then we climbed on board. I started up and took off.

I planned to follow a direct route to the Grand Canyon from Wickenburg. The only way I can make money on this fixed-price flight is to keep the flight time as short as possible. Duats calculated flight time as 1 hour and 16 minutes, but that was based on 110 knots. With my heavy load and the climbs necessary to clear the Weaver Mountains and Mogollon Rim near Williams, I was lucky to get 100 knots. The route took us over Yarnell, between Kirkland Junction and Kirkland, east of Skull Valley, West of Granite Mountain and Prescott, west of Chino Valley and Williams, and west of Valle. In fact, much of the ride was over open high desert — mostly deserted ranchland. I pointed out points of interest as I saw them. The men were generally quiet, but occasionally spoke to each other in German. The man who spoke good English usually told me what they were saying or asked me a question related to what they were saying.

It took about 90 minutes to get to the canyon. It was a beautiful day and the air was smooth — until we got to the airport. Then the wind was variable with some small gusts. The tower cleared me to land along the taxiway — with a quartering tailwind — but I didn’t have any trouble with the landing. I set down on the helipad I used to land at when I flew to work at Papillon two summers ago. I cooled down, shut down, and escorted my passengers to the terminal, where they’d board their 12 PM flight on Grand Canyon Airlines.

They weighed in at the counter and that’s when I learned that the “200-lb man” was really a 240-lb man. So I figured that the total weight I was carrying was about 80 pounds more than the ranch folks had told me. I calculated for 40 pounds more. When I ordered fuel, I had only 15 gallons put on. With the airport at nearly 7,000 feet, I wanted to be as light as possible for departure. It least it wasn’t hot — the ATIS claimed 12¬?F.

While waiting for the flight, my passengers broke out their box lunches and I shared it with them. Sandwiches, cheese, fruit, chips, cookies, and lots of bottled water. One of the photographers I knew from Papillon showed up to take pictures. He remembered me and we spent about 20 minutes chatting about things at Papillon and the pilots I’d known there. Then they started boarding. My passengers got on line for their flight and my photographer friend went to work. I settled back in the sun with my book and a bag of chips.

The flight lasted nearly an hour and when my passengers emerged, they flashed thumbs up. We went back into the terminal so they could look at their picture (which they bought) and use the rest rooms. Then we all climbed back into the helicopter. I fired it up, waited a long time while it warmed up, then called the tower and took off. I had a quick beep from the low rotor RPM horn as we started our takeoff run (rusty pilot technique), but we had plenty of power and were soon climbing over the taxiway and then away from the airport.

The helicopter felt heavy at that altitude and vibrated like the R22 used to when I left Grand Canyon Airport with full fuel on board. I could barely get 90 knots at the allowed power setting of 21 inches of manifold pressure. But we had a tailwind and were making well over 100 knots ground speed. I decided to take my passengers back a different way, over Prescott and down the Hassayampa River. I fully admit this was more for me than for them. Flying in a straight line was downright boring.

We descended over the Mogollon Rim west of Williams and the helicopter immediately felt better. More normal, if you know what I mean. Understand that the vibration at higher altitudes when you’re heavy is perfectly normal. Or at least it was to me. I remember my trip in the R22 when I flew around the Grand Canyon Airspace. I had to cross the Kaibab Plateau, where it was necessary to climb to 9600 feet. Even though it was just me and my gear on board and I only had 3/4 tanks of fuel, that poor helicopter vibrated as if it were going to come apart at the seams. (Okay, so I’m exaggerating.) I felt a lot better when I could descend to a more reasonable altitude and the vibrations went back to their normal levels. The R44, on the other hand, has very few vibrations (compared to the R22) so they’re a lot more noticeable when they occur.

Along the way, my passengers showed a keen interest in every rock quarry we passed over or near. I learned that that was their business: making patio blocks out of concrete and rocks. They saw a few antelope just outside of Prescott. We flew around the west side of the airspace because the airport was so busy the controller told us to stay five miles out. Then we passed over the town of Prescott and headed down the Hassayampa River. When we got to the canyon, the man next to me said they were getting their own private tour of a little Grand Canyon.

As we neared Wickenburg, one of the passengers asked if we could fly over the ranch. So I did a fly-by for them. We landed at the airport and the van I’d called for when we were still 8 miles out was waiting to take them back to the ranch. They gathered their belongings, thanked me and paid me, and shook my hand. Nice guys. It was a pleasure to take them.

It’s Sunday morning now and I’m “on call” for the ranch this afternoon. So there might be more flying fun later today. In the meantime, I’ll clean up the helicopter after its two big charters and stay near my cell phone.

On Blogging and Podcasting

Episode 7: On Blogging and Podcasting.

Everyone has a different idea of what blogging and podcasting is for. I thought I’d take a few bytes to explain my views. It’ll help readers and listeners understand what motivates me to share the information I share.

Transcript:

Hi, I’m Maria Langer. Welcome to Maria Speaks Episode 7: On Blogging and Podcasting.

Everyone has a different idea of what blogging and podcasting is for. I thought I’d take a few bytes to explain my views. It’ll help readers and listeners understand what motivates me to share the information I share.

My blogs and podcasts are separate and, in most cases, do not overlap. This entry is one exception; it’ll appear in both.

My blog, which is called Maria’s WebLog, contains over 270 entries written since October 2003. These entries cover a wide range of topics dealing with my everyday life and opinions about what I see going on around me.

I consider Maria’s WebLog to be an online journal. My main purpose is to share my experiences and views with readers. Part of it is to journalize my life so I can remember events in the future. The other part is to let my friends and family members know what’s going on in my life. I’m surprised when I meet someone and they tell me they’ve read my bLog. They’re welcome to read it, but they need to understand that I’m not writing it for them. I’m writing it primarily for me.

I don’t know how many people actually read my blog because it’s hosted on my .

Mac account and there isn’t any stat software for me to track it. But it appears that it is widely read by people all over the world. (If you’re reading it now, you might want to take this opportunity to use the Comments link to check in with your name and location, just for kicks.)

Some people read my blog entries and are offended by them. I think that’s pretty funny. There are so many things in this world that are far more offensive than anything I could write. But these people focus on a comment or observation or opinion I made in these blogs and use it as evidence that I’m some kind of evil person. Whatever. I think people like that need to get a life.

I made an entry the other day that left people wondering whether my entries were truth or fiction. What do you think?

One more thing about the bLog. I maintain it using iBlog software, which is a Macintosh-based blogging client. iBlog is a really cool little software package because it runs on my Mac and does not require access to the Internet to use. Instead, it keeps a database of all my blog entries as I write them. When I’m ready to publish, I connect to the Internet and click a button. This was really useful when I took my laptop to my place on Howard Mesa, which is off the grid. I’d just hit the coffee shop in Williams a few times a week and use their wireless access to update my blog and check my e-mail.

Maria Speaks is my podcast. For the folks reading this transcript in my bLog, here’s a brief definition. A podcast is an audio recording saved in a format that can be listened to on a computer or MP3 player, like an iPod. I call my podcast Maria Speaks because it’s me talking and I couldn’t think of a better name.

My idea of a podcast is that is should share useful information with listeners. After all, that’s why I subscribe to and listen to podcasts.

For example, I’m a big fan of NPR and now that I’m not tuned in all day, I like to listen to NPR stories as podcasts when I’m driving or flying.

I’ve tried a bunch of podcasts that I thought were a waste of my time. I don’t listen to them anymore. If there’s no value in what I’m listening to — if I can’t learn something or be entertained by something I can’t hear elsewhere — then what’s the purpose? There are too many podcasts full of talking heads that aren’t saying anything worth listening to. I don’t want my podcast to be like that.

So when it came time for me to do my own podcast, I had a choice. I could either vocalize my existing bLog entries by reading them — like I’m doing here — or I could create new content of interest to listeners. Since I don’t think my bLog entries are informative enough to attract listeners, I decided to go with new content.

I make my living writing about computers and there’s always some tip or trick I could share. So I decided to focus on computer-related topics, including tips and tricks for being more productive. I’m primarily a Macintosh user, so most of my podcast entries are about Mac computing, although I did publish a cross-platform episode about Microsoft Word yesterday. And because I’m not comfortable recording without a script, each episode has a transcript available online, complete with screen shots if necessary.

Please don’t get the idea that Maria Speaks will only be about using computers. I hope to come up with other interesting topics to enlighten listeners. I also encourage all listeners to visit the Maria Speaks home page and leave comments about what they’ve heard. Was the episode helpful? Not helpful? Boring? Interesting? What do you want to hear? All I ask is that you be gentle with me. Harsh comments don’t get results.

You can find links to the home pages for Maria’s WebLog and Maria Speaks on my Web site, www.aneclecticmind.com. Those pages include links for subscribing to the RSS feeds for both.

Well, as usual, I hope you found this episode interesting. You can read its transcript on Maria’s WebLog. Thanks for listening. Bye!

The Mohave County Fair

We give Kingman residents and visitors helicopter rides.

I started planning for the Mohave County Fair at least a year ago. I exchanged phone calls and e-mails with the folks who handle the concessions for the fair, including Betty Watters and her son Phil Richardson. I flew up to Kingman in June to check out possible landing zones. That’s when I paid the fee for my “booth” in the north parking area. The dates September 15-18 went from pencil to ink on my calendar.

Mike and I went up to Kingman early Thursday morning. I flew, Mike drove. Mike brought our camper up there. It’s a 3-horse slant trailer with living quarters. I left about an hour after Mike and arrived at the fairgrounds the same time he did. I did a lap around Kingman, planning my route for rides, while Mike parked and secured my landing zone. Then I landed in a huge cloud of dust, cooled down the engine and shut down. We spent the next two hours setting up boundaries for the landing zone, putting up banners and signs, and doing housekeeping chores in the camper. The nice folks at the fairgrounds allowed us to park the camper at one end of the landing zone. On the other side of the fence were a few portable toilets (which we wouldn’t need) and the trailers and living quarters for the carnival folks. Beyond that were the carnival rides and attractions. And beyond that was the rest of the fair.

Photo

Mike made a trip to the local True Value hardware store to pick up a sprinkler and another hose. Phil had run his own hoses to the landing zone and we decided to use a sprinkler, which we’d move periodically throughout the day, to keep the landing zone damp. That would keep dust down. Mike also had to take a trip to town to fill the camper’s two gas bottles so we’d have refrigerator, hot water, and stove use. The camper also has a full bathroom with two holding tanks, so we could use our own clean toilet and shower daily.

We also had Jack the Dog and Alex the Bird with us. Jack had to stay on a leash. Alex stayed under the trailer’s awning in his cage. Neither of them were bothered by a helicopter taking off and landing about 150 feet away from them.

Betty had asked her neighbor, Tony, to give us a hand. Tony is on permanent disability after being hit by a truck years ago, but he was fully capable of helping us with the things we needed to do. He wound up working with us on Thursday and Friday and lending moral support on Saturday.

By 2 PM, we were ready to do rides. The only thing we needed were passengers. That was the problem. It was 2 PM on a weekday. Kids were in school, parents were at work. No one was interested in the carnival or our rides.

The ride took off from the north parking area. I had to make a crosswind departure, since heading into the wind would have taken me right over the carnival rides. From there, we flew up the east side of Centennial Park, north of Wal-Mart, just north of the I-40 pass through the mountains, down to the Beale Street exit on I-40, along the south side of Andy Devine Boulevard, across Hualapai Mountain Road, and up the east side of the fairgrounds. I made a 1807deg; turn at a cell tower north of I-40, then came straight in to the landing zone, landing right into the wind. Total time was about 6-8 minutes.

I’d priced the rides at $25 per person including tax. This was before fuel prices went up, so it was a real bargain. My usual ride prices are $30 to $35 per person for an 8-10 minute flight, but the fair folks practically begged me to keep the price down. So I did, depending on the cheaper price to attract more passengers and shorter ride length to make it profitable.

We managed to give 11 rides on Thursday. Very disappointing. We went to the Dambar restaurant for a good dinner, though.

On Friday, things weren’t much different. I walked over to the nearby junior high school around 10 AM, suggesting that a few of the teachers might want to walk students over to see the helicopter and get one of my presentations on aerodynamics or how helicopters fly. The school was very interested, but Fridays are half days so classes are shorter. There wouldn’t be enough time for any of the classes to walk over and back and get the presentation.

Things picked up late Friday afternoon. We did 10 rides, most of which were after sunset. The moon was big and full and beautiful and the carnival rides looked great from the sky.

By that time, our two helpers, Alex and his college buddy Ryan, had come to help out. There wasn’t much for them to do. They pitched their tent behind our camper, uncomfortably close to those portable toilets on the other side of the fence. We ate carnival food for dinner and walked around the fair.

We were pretty disappointed at the turnout so far.

Saturday changed everything. Although I wasn’t supposed to start flying until 10 AM, my first passenger arrived at 9, before the fair even opened. Heck, I didn’t care. I gave him a ride. For the next two hours, I did a few rides. Then the dam burst (so to speak) and I had a nonstop flow of passengers. Mike, Alex, and Ryan loaded 2 or 3 people on board for each flight. The only time I shut down was to get fuel at the local airport 5 miles away (three times!) and to take a 20-minute lunch/bathroom break. I put 5.5 hours on the helicopter’s hobbs meter that day — quite a bit when you consider that the hobbs only ticks when I’m in flight so my time spinning on the ground didn’t count. I figure I took about 100 passengers for rides that day. Most of them were in a helicopter for their very first time. I gave all the kids who flew with me helicopter toys (while they lasted). One guy liked it so much he went up twice.

We celebrated with four steak dinners at the Dambar.

Sunday looked as if it might be a repeat of Saturday, but the flow of passengers was starting later. The wind was stronger than the previous few days and it was warmer, so taking off with a crosswind (rather than a headwind) when I was heavy was tough. I did about 20 rides before we decided to call it quits. It was 1:30 PM. We packed up, said goodbye, and got ready to go.

I stopped off at the carnival office to leave a card for the carnival owner. I’d had a good event and was interested in working with carnivals to do it more often.

Mike left with the camper and I took off with Alex and Ryan. We took the scenic route home: to Bullhead City and down the Colorado River to Parker, where we refueled (at $4.54 per gallon!). From there, we hooked up with the Bill Williams River, overflew Swansea and the Alamo Dam, and returned to Wickenburg.

We’ll go back to the Mohave County Fair next year. But we’ll just spend all day Saturday and Sunday. I’m already looking forward to it.

My thanks to Betty and Phil for all their help.