RSS Summaries

Posted on by
2

A reader chastises me.

The other day, while writing about the Reading Options in WordPress, I decided to experiment with this blog. I togged the settings so only summaries of my entries would be sent to people accessing with RSS readers.

Understand that I don’t use an RSS reader. I surf the old fashioned way, with a Web browser. I don’t surf that often and I don’t follow any one particular blog or site. So it’s never been an issue for me.

But for the book, I had to understand what this WordPress feature did. So I toggled it to the Summaries setting, downloaded a feed reader, and looked at the result. What I saw was a list of 10 or so posts in a window. I’d click a post title and the beginning of the post would appear in a window pane beneath the list. There was a link at the end indicating that there was more; clicking the link brought me to my Web site.

This seemed a logical way to release content via RSS. After all, didn’t I want visitors to come to the site where they could read not just the articles but the comments? And see all the pictures that came with the piece?

Dori of Wise Women didn’t think so. She commented on my “Stand Up for Your Principles” piece to stand up for her principles: that RSS feeds for blogs should include the entire content.

Whew! No problem. This morning, I remembered what I did to create the summaries (I did have to remember something I learned about 2 whole days ago!) and toggled the option back to its original settings. I just checked it with my feed reader and it’s working fine.

But this makes me curious. I’d like to know more from the folks who use an RSS feed reader to follow this blog. Here are a few questions; I’d appreciate it if you’d take the time to answer a few of them in the Comments for this post.

  • How often do you check the site? Regularly? (If so, I’m flattered to be on your list!)
  • Why do you prefer a news reader to a Web browser?
  • Does your news reader display formatted text and graphics?
  • Which reader do you use? On what computer platform?
  • Would you like to share any advice for people considering using a reader or for bloggers like me who aren’t fully aware of the benefits?

Although I’m a technical person and write about computer technology for a living, I made a decision long ago to concentrate on only those technologies that I use or write about. There’s just too much out there to learn it all — and still have a life that doesn’t revolve around a computer! As a result, my knowledge of computer technology is spotty, with expertise on certain topics balanced by sheer ignorance of others. (Ignorance is bliss, they say.)

Perhaps its time to give the RSS feed reader topic a bit more attention. What do you think?

PostScript: I just used my RSS reader to check out the other blogs that were included in it. It appears that none of them include the full text of the article. What’s going on here? Perhaps that’s why I discarded the idea of using a reader when I first tried it about two years ago? Because you had to go to the Web site anyway to read the article? It seems that, in many instances, the reader adds an extra step to following blogs. If you’re commenting on this piece, please comment on that, too.

“No More Confusing Interest!”

Posted on by
Comment

“Just pay $7 per $1,000 outstanding balance per month!”

I guess Capital One thinks Americans are too stupid to understand how interest works. Kind of strange when you think about the level of debt most people carry. Experience should have taught them by now.

Yet yesterday I got a credit card offer from Capital One (not in my wallet). The ad promised “No more confusing interest” and that I’d only have to pay $7 per $1,000 of outstanding balance. Per month. On top of the minimum payment, of course.

I did the math. It isn’t difficult. 7 / 1000 = .007 x 12 = .084. That’s 8.4%.

I don’t know if that was a fixed interest rate. I shredded the offer right after doing the math. I doubt it, though — I don’t think you can get a fixed interest rate credit card anywhere these days. But, at the same time, I don’t think it’s such a good deal, especially when you can still get interest free intro credit cards. I got another offer for .99% for five or six months the day before yesterday.

On related matters, I realized yesterday that if I took advantage of a credit card offer for $20,000 cash advance at 0% interest for a full year, stuck enough in my checking account bank to cover minimum monthly payments at $250/month (that’s $3K), and invested the rest in an ING CD at 4.5%, I’d come away with a $705 profit, even after paying a cash advance fee of $75. (Yes, I created a spreadsheet to do the calculations for me. I did write a bunch of books about Excel, after all.) There’s no risk of loss — ING accounts are insured — but timing is everything. You need to have the principal ready to give back to the credit card company before that intro period is over. You might want to stick with a 9-month CD to make sure it’s available when you need it; the rate drops to 4.35% and the profit drops accordingly.

Once an accountant, always an accountant. I guess.

Brew and Go

Posted on by
Comment

I get a new coffee maker…again.

It’s disposable products all over again.

Brew and GoI’ve been using a Black and Decker coffee maker called “Brew and Go” (formerly, “Cup at a Time”) for about fifteen years now. I like fresh-brewed coffee every morning, but Mike doesn’t. It’s silly to make a whole pot — even if I do want a second cup, I won’t take it from a pot that’s been sitting on a burner for 30 minutes. So I make a single fresh cup every time I want one.

(And in case you’re wondering, I usually don’t drink brewed coffee in restaurants. Burner sludgification is one reason. The other is that most restaurants out here don’t know how to put enough coffee in the brew basket to make a strong enough cup. I think it’s because it’s pre-measured and it comes in bags. This is the same reason I’m avoiding those “pod” coffee makers. You can get decent restaurant coffee in New York and on the west coast, but in the midwest, southwest, southeast, and elsewhere, the only way I can get a cup of coffee that’s strong enough for me is to order a latte at a coffee shop.)

The other day, I bought my fourth or fifth one of these coffee makers. They work fine for about two years, then they start getting unreliable. The usual symptom is that they stop brewing before all the water in the reservoir has been heated and pumped up to the grinds. You wind up with a 2/3 full cup of coffee with leftover water. It isn’t a big deal to push the button again — usually that’s enough to get the rest heated and brewed. But experience has taught me that this is only the first of the pot’s symptoms. The next step is that button getting broken. And when that happens, the coffee maker won’t work at all.

So I consider the funky button a warning sign. I’ll need a replacement soon. So I went online and found a replacement for a good price on Amazon.com. (Note to my critics: Sadly, you can’t buy anything like this in Wickenburg, so shopping locally was once again out of the question.)

Oddly enough, they showed two models and the only difference I could see between them was the size of the machine. Since both were under $20 with only a $4 price difference and I figured that I could use one in my hangar, too, I bought them both. I was curious to see how they differed.

They arrived yesterday. Their boxes are identical with two exceptions:

  • One box says “Deluxe” (that’s the $17.99 model) and the other doesn’t (the $12.99 model).
  • One box illustrates and identifies a stainless steel travel mug (the $17.99 model) and the other one illustrates and identifies a plastic travel mug.

I opened the deluxe model and got a good whiff of the plastic aroma that accompanies many new appliances made primarily of plastic. I pulled out all the packing material, plugged it in, and brewed through some plain water. Then I decided to read the instructions for some tip to get the smell out. The instruction book only had four pages in English — not much to instruct.

Of course, the unit is made in China. I’m not sure if the original “Cup at a Time” was made in China. It was a long time ago. It was probably Taiwan back then.

I brewed up a cup of coffee using the built-in filter basket. I usually don’t use that thing because grinds get through it into the coffee. I like my coffee very strong and usually grind the beans to the first “Fine” setting on the machine at the supermarket. The “gold” filters that come with many coffee makers simply aren’t fine enough to prevent the grinds from going through. But I figured I’d try it a few times. If I could make a good cup of coffee with the reusable filter, I’d save a few bucks on paper filters — not to mention the time it takes to cut the #2 cone filters down to size. I’ll experiment over the next few days and maybe even get some coffee ground a litte coarser.

The first cup of coffee tasted a bit like the plastic I smelled. Or at least I assume so — I don’t make a habit out of tasting plastic. There’s a puddle of finely ground coffee at the very bottom of my cup, like mud on the bottom of a pond. The first problem will be remedied with time, the second will probably require a grind or filter change.

But the coffee maker performed flawlessly, using up all its water and making a nice, hot cup of coffee.

The old coffee maker is now sitting in the trash like the three or four that came before it. As we all know, it’s usually more expensive to get these things fixed than to buy a new one. That’s how the disposable economy came into being.

A little side story here. Our original DVD player only lasted about 5 years. We tried to get it fixed and everyone we brought it to quoted us a price to look at it that was more than the thing was worth. Then we tried to give it away to a school or electronics repair training facility so the students could use it to learn about the machine and/or how to fix it. No one would take it. Mind you, this isn’t a machine that had been abused. All of its parts pretty much still worked. It just didn’t play DVDs anymore. The only option was to throw it out.

I recently sold two very old Macs (an 8500 and a beige G3) on eBay. I got 99¢ for one and $9.99 for the other. Plus shipping, of course. Although I’d spent a total of more than $5,000 for the machines years ago, I was willing to take the money. Not because I needed the $10.98 but because I didn’t want to take the two machines — which were still perfectly functioning — to the landfill.

I guess their new owner will do that one day.

It’s time for another cup of coffee.

Technorati Tags:

Stand Up for Your Principles

Posted on by
3

I’m baffled by people who can’t.

I consider myself a person with principles. My principles might not match yours and you might not even think they’re any good. But that’s not the point. I have principles and I stand by them.

For example, I believe that if a man and a woman are in a relationship, they should be faithful to each other. That’s one of my principles.

I believe that people should not lie, cheat, or steal. That’s another principle.

I believe that people should be tolerant of other people’s religion, political beliefs, and sexual orientation. More principles.

These basic principles — and lots more where they came from — are what guide me in my daily activities.

I stand up for what I think is right. That’s why I write so many opinion pieces on this site and wickenburg-az.com. I see something I don’t think is right and I want people to know it. I want them to see — even for a moment — why the thing is wrong. Or at least why I think it’s wrong. I want them to look into it for themselves, think about it with their own brains, and make a decision. Then I want them to act on that decision.

One of the biggest complaints I hear these days is that a single person can’t make a difference. I think that’s a cop-out, an excuse not to try. The trouble is, too many people believe it. Too many people are willing to ignore their principles because it’s the easy thing to do.

Everyone can make a difference. If you believe in something, let it guide you. Don’t settle for less.

And don’t give up, just because it’s easier than trying.

Outsourcing, Continued

Posted on by
2

Visitors start a lively discussion, but may be missing my point.

My “Just Say No to Outsourcing” piece has gotten a little discussion going in its comments. It appears that some readers are confusing “employ America” with “buy American.”

I’m all for the first, but have limits on the second. While I’d rather buy American-made products, I do have to spend my money where I’ll get the best value for my dollar. Nowhere is this more important than when making a major expenditure, like one for a car.

As I was growing up, my aunt was vehemently opposed to buying anything not made in the US. While that was possible back in the 1950s and 1960s, it soon became very difficult. She stubbornly stuck to her guns for a very long time, buying US-branded televisions and cameras and cars when she could have gotten better quality products, often at a lower price, from Japanese or German manufacturers. In the end, she had to give in, at least on the electronics stuff.

There was a time when the US was at the top of the game, when US-made products were technologically advanced and of better quality than you could get anywhere else in the world. But with some exceptions, that’s changed. For years, people have been recognizing that they can get more value for their hard-earned money by buying products made and marketed by overseas companies.

Personally, I think it’s tragic. I believe that America’s failure to stay at the top of the product manufacturing game is a result of laziness on the part of R&D teams and cost-cutting measures on the part of management. It also has a lot to do with pay levels, benefit packages (often required by unions), and the cost of living in this country. Even if we could make the best product in a given category — say, digital cameras — we couldn’t afford to make it or sell it. All these things combined — not to mention our smug “America is the greatest country in the world” attitude — have led to our manufacturing downfall. After all, it’s hard to make yourself better if you already think you’re the best you can be.

And things are getting worse, as goods mass-produced in China and Korea at rock bottom prices flood the marketplace, replacing quality with items so inexpensive that we can buy with the atittude that when it breaks, we can just throw it away and get another one.

I tried to buy a leather wallet in a leather goods store about a month ago and couldn’t find a single one that wasn’t made in China. It scares me when we get to the point that we simply don’t have a choice. I know now how my aunt felt when she bough her first Canon camera. But at least she was getting a quality product from an established and respected manufacturer.

Anyway, before I alienate any other readers with what will likely be taken as an unpatiotic attitude (a dangerous position to be in these days), I just want to remind readers that if they love America, they should support it any way they feel comfortable supporting it.

Although I’m not comfortable enough to buy a Ford, I’m very happy to avoid doing business with US companies that send customer service jobs overseas. And I’m not afraid to speak out against overseas outsourcing.

Technorati Tags: , ,