Tag Archives: boats

Embracing the Cruising Life

Posted on by
4

Report from my first two months as a trawler owner.

If you’re looking for a blog post with specific details about my trip on the Great Loop so far, this isn’t it.

When I write it, you’ll find it in My Great Loop Adventure blog. It’ll have more pictures and, with luck, links to videos on YouTube. Be patient, however; I really do need to get stuff around the house done before I can dive into that. If you haven’t subscribed to that blog, please do. There’s no spam — just immediate notifications of new posts there.

If you’ve been following this blog and/or My Great Loop Adventure blog, you probably know that after exploring the idea of small boat cruising, going on three separate trips ranging from 12 days to 5 weeks each, and researching the kind of boat I might want to cruise in, I bought a 2019 Ranger Tug R-29 CB. I took delivery of the boat right after Labor Day weekend and have spent a total of about 40 days on board since then. The longest stay on board ended yesterday morning: 23 consecutive days traveling from Chicago to Alton, IL (near St. Louis).

I thought I’d share a few of my thoughts about my experiences so far.

It’s Like RVing — on the Water

I have years of experience traveling with various types of RVs. Cruising in my own boat is almost identical to RVing in something like a motorhome or my truck camper. You drive what you sleep in and everything you need/want with you has to fit on board.

To get from place to place, you follow navigable waterways (roads). I’m fortunate in that my boat needs only 2 1/2 feet of water to float in and can fit under bridges as low as 14 feet above the water. (This is almost like traveling in my truck camper, which has high clearance and 4WD to get me into places other rigs can’t go.) There are plenty of printed and electronic resources for finding routes and destinations. My boat has three onboard chart plotters. They’re a lot like using Google Maps on my phone to navigate on the road — they can route me anywhere it’s possible to go. (Unlike Google Maps, however, I can actually turn over control of the boat to the chart plotters and their autopilot system and let them do the driving.)

At the end of a travel day, you can either stop at a marina (campground), stay at a free public wall (truck stop), or anchor out (dry camp). You can stay as long as you want — depending, of course, on whether you need provisions. You buy provisions along the way, taking on fuel and water and groceries when you can. You need to pump-out (dump) your waste tank. Plugging in to shore power (campground power) powers your boat’s systems and charges your onboard batteries; when you’re not plugged in, you’re powering everything off the onboard batteries. (My boat has a total of 6 AGM batteries: 4 house batteries, 1 engine battery, and 1 thruster battery.) A solar panel or generator can provide power or help recharge batteries when you’re not plugged in. (My boat has 160 watts of solar on the roof and I’ve brought along my old Honda 2KW generator in case I need it.) Of course, the batteries are all charged automatically when the engine is running. All this is pretty much the same as with an RV.

There are some notable differences:

  • You do not connect to a fresh water source at a marina. Instead, you manually fill a tank and a DC-powered pump handles pressurization at the sinks/showers.
  • You have only one waste tank, which is equivalent to an RV’s blackwater tank. It needs to be pumped out with a suction hose — unless you’re a certain number of miles off shore (in the ocean) where you can pump it out in the water. (I won’t ever be that far off shore.)
  • There is no gray water tank. Water from the sinks and showers goes right into whatever body of water you’re floating in.
  • The water to flush your toilet comes from the body of water you’re in — not from your fresh water supply. Fresh water is used exclusively for the sinks and showers.
  • The water heater does not work with propane. Instead, it’s either heated by the engine while you’re under way or heated with an electric water heater when you’re plugged into shore power.
  • The refrigerator does not work with propane either. Instead, it works off DC power and is the largest consumer of power when you’re not plugged in. (I find this maddening.)

Fuel Costs

My biggest expense is fuel, which certainly does explain why so many people buy boats like this and don’t take them anywhere. The boat takes diesel and has a 145-gallon tank. I’ll let you do the math on my most recent top-off of about 105 gallons at $5.99/gallon. Ouch.

Of course, fuel consumption is somewhat controllable by moderating my speed. Yes, at full throttle the boat can go 20 knots. It also burns an absurd amount of fuel at that speed. Volvo — the maker of the Penta D4 300 engine — recommends operating at 80% to 90% RPM and that does reduce both speed and fuel consumption, but not enough to make long trips between fuel stops possible. What I’ve discovered is that a cruise speed of about 8 knots is a good compromise between fuel consumption and speed. I can go slower to conserve more fuel but I can also speed up if I need to get somewhere in a hurry. How do I know this? Well, the boat’s engine and chartplotter work together to provide actual speed and fuel consumption data as I cruise.


Why, of course I took readings of actual data and plugged them into an Excel spreadsheet so I could chart them. Note that these NMPG and SOG numbers might be a tad high given that we were in the Mississippi River when I noted them and current may have given us a small boost.

So if you’re wondering how far I can get on 145 gallons of diesel, I’m figuring about 300 miles — if I watch my speed. Yes, I can go farther if I go slower but there are only so many hours in a day and I have no plans to cruise at night.

Overnight Accommodations

My other major cost is marinas. I’ve found places to dock ranging in price from free to about $90/night. You generally get what you pay for, although location does play a role.

My most expensive marina stops have been at Roche Harbor (a vacation destination) and downtown Chicago (a major metropolitan area). Both had all facilities I’ve come to expect: 30 amp power, water, pump-out service, restrooms, showers, and restaurants/groceries within walking distance. (More on all those in a moment.)


I only took one decent photo while at DuSable Marina in Chicago — and that was early one morning. We were there from October 13 through 15 and the marina was still quite full. But on October 31 (when we were about 300 miles south), it was completely empty because it closes for the winter.


Grafton Harbor was one of my favorite stops. A great restaurant, restrooms, showers, and laundry were all walking distance and we were able to top off water and fuel and get a pump out before leaving.

On the free end of the scale, we parked at the Jolliet, IL City Wall with 30 amp power, the Peoria City Dock with no power in one spot and just 110 v (household current) power in another, and at Mel’s Illinois River Restaurant, with no power. While Peoria had restaurants and a great bakery within walking distance, it’s also the stop where someone stole my portable BBQ grill right off the back deck of the boat one night. (I was lucky they didn’t take the inflatable life jackets or my electric bike, all of which were also on that back deck and a lot more valuable.)


Buddy boats R-31 CB “Pony” and R-29 CB “Do It Now” at the free wall in Jolliet, IL. This was a very nice free stop, especially because of the 30 amp power, autumn foliage, and park for dog walking, but there wasn’t much within walking distance.


Here are “La Principessa,” “Do It Now,” and “Nine Lives” at Peoria free City Dock. The facility was designed for boats even smaller than mine so the larger boats were left to tie up on a long floating dock that could barely fit two of us. “Nine Lives” is actually parked against the wall beyond the dock and tied up to the top of it; the only way they could get on and off the boat was to climb to their command bridge and over the rail at the top of the wall.

Of course, you can save a ton of money by simply anchoring out overnight. There are plenty of anchorages along the way and and resources like Waterway Guide to tell you what to expect at most of them. The boat is completely self-contained so I don’t need to come on land if I have water on board and space in my toilet waste tank. Of course, with two small dogs on board, dealing with their waste removal needs can be a challenge if I can’t just step off the boat with them for a walk. We anchored out just one night and our spot was wonderfully protected, quiet, and dark. Unfortunately, one of my pups refused to use the special “peepee mat” I’d bought and would up holding it all in for at least 40 hours. More training is required.


Connie on “La Principessa” shot this photo of “Do It Now” at anchor. This was the first and only time I’ve anchored out and I think I could have dropped the anchor a little farther from shore. I have an app on my phone (and my chartplotters) that can alert me if the anchor starts dragging, but I still slept like crap that night, worrying about the tail end of the boat drifting into the shore and not being able to power out. Yes, a stern anchor would help, but I don’t have one.

Scenery and Points of Interest

The scenery as you cruise varies greatly on the time of year and the waterway you’re on. The Puget Sound area, where I got my first experiences with the boat, offers outstanding views of forests and mountains, with all kinds of mammals and birds swimming in the water around you. The Chicago River is a crazy combination of buildings, bridges, and other water traffic. Farther south was industrial areas. The wide open spaces of trees and farms and small towns.

The views change gradually, given the slow speed. It reminds me a lot of how I experienced changes in terrain on long cross-country trips in my helicopter. Yes, I was moving along at 100 knots or more, but the grand landscape of the west changes gradually over many miles. This is the same, but with more subtle changes over fewer miles and longer stretches of time.

Most of the towns that have marinas or free places for a cruiser to park a boat overnight also have shops and restaurants. There are quaint downtown areas, many of which have historic buildings. There are always museums. Again, there are plenty of resources to help you find places of interest for a stop or an overnight stay. I have to admit that my trip between Chicago and the St. Louis area was a bit disappointing, mostly because we found ourselves in a bit of a hurry early and late in the trip, or dealing with cold weather, and I was sick with a cold in the middle. I feel as if I missed a lot of the exploring I might have done.

Weather

Weather is definitely a factor when you’re cruising in a small boat, although your tolerance to weather depends on your boat, your experience, the severity of the weather, and the way the weather affects the body of water you’re on.

In the two months I’ve been cruising on my own boat, I’ve been pretty lucky about weather. I had windy conditions in Puget Sound one day and relatively windy conditions on Lake Michigan another day, but neither experience was beyond what I or the boat could handle. Yes, we were tossed around and yes, water came up over the bow and had me using the windshield wipers on a day it wasn’t raining and yes, I wished that part of the trip was over and done while it was happening. But nothing broke, no one got sick, and the boat was never in any danger. Wind was also a factor during our first few days on the Illinois River, but again, it wasn’t a problem other than discomfort.

And of course, no one complains when the water is like glass or has tiny ripples that barely rock the boat.

I had one day of poor visibility on Puget Sound but it never got below a mile. I used the experience to experiment with my radar system — learning to read it so I could avoid obstacles if fog came up suddenly on a future cruise. Real fog delayed my departure from overnight parking on two occasions — who in their right mind would be in a hurry to leave a safe spot when they couldn’t see where they were going? (Contrary to popular belief, I am still in my right mind.)


Fog delayed us only a short while at the $20 Mel’s Illinois River Restaurant dock in Hardin, where we stopped with “La Princepessa.” (Excellent, reasonably priced restaurant, by the way.) Our next stop was Grafton, only 20 miles away so it was a short day anyway.

We did allow weather forecasts to delay us a lot longer than we should have been delayed in Peoria, IL. The forecast called for high winds — which, other than somewhat rough water on the Illinois River, only really affected us in locks — followed by heavy rain. Rain forecasts went from less than an inch to up to two inches and then back down to less than an inch. We’d been warned about floating debris after regional rainfalls exceeding 1 inch. Another, larger boat was waiting it out and they seemed very concerned. That got my companion worried. It also got me concerned. What didn’t make things better is that I’d been dealing with a bad cold for a few days and was exhausted after even only a few hours at the helm. So I decided to wait, too.

Unfortunately, the “hazardous weather” turned out to be a big nothing burger. We wasted a total of 5 days in Peoria when 2 would have been enough. That basically closed the window for us to get much farther than St. Louis before it was time to go home. (The way I see it, 3 days wasted in Peoria plus 2 extra days spent in Grafton plus 2 extra days spent at Alton would have gotten us to Green Turtle Bay — a much better stopping spot to continue the trip in early December. Yes, logistics to get to St. Louis would have been tougher, but it would have been worth it to get what I see as the hardest part of the trip — Alton to Paducah — behind me.)

But this is all a learning experience. And I need to remember that sometimes the weather forecasts won’t overstate the hazards. Sometimes they’ll understate hazards and I could find myself in trouble. Better safe than sorry.

Size Matters

Of all the boats belonging to “Loopers” we met in October, my boat was the smallest. The second smallest was also a Ranger Tug, but it was the next size up — an R-31 rather than my R-29. All of the boats had two people on board.


Nine Lives is a 48′ 2012 Kadey Krogen. Its owners, Kenny and Rhonda, live aboard year-round and just travel along the Great Loop. I took this photo as they left Alton Marina the other day.

According to Ranger Tugs, my boat is supposed to sleep six people. This number assumes two people in the main berth (which has an odd-shaped bed), two people in the lower berth (which has a full sized bed), and two people on the table converted to a bed (which I can’t do because the boat didn’t come with the required cushion). The reality is that unless two people really, really like each other, only one person is going to fit comfortably in each of the two berths. So I don’t think I’ll be encouraging any couples to accompany me.

Although there’s plenty of space on board for a traveler to get some alone time, the amount of comfortable space varies based on the weather. Sure, on a great day it’s wonderful to sit outside on the aft deck or up on the command bridge in the fresh air. But if it’s cold or rainy, inside is more pleasant. Then there are just three spaces (other than the head): the front cabin, the main cabin, and the lower cabin. The front and lower cabins are mostly beds. The main cabin has a nice sized table and two benches big enough to accommodate four people comfortably. That’s it.

The boat is also not designed for fat people. I’m not fat (in a rotund way), but I am overweight and I do need to shimmy through narrow spaces. They say I have a walk-around bed, but you can realize the absurdity of that statement when you try to walk around it. The door to the head is so narrow past the corner of my bed that it’s necessary to go through sideways. And I’ve stopped trying to get into the space between the helm and the back of the bench seat when the seat is facing the table. It’s almost wide enough.

Janet (who joined me on my October trip) and I called maneuvering around the boat, especially to get things out of the lower cabinets and refrigerator, “boat yoga.”


Here we are up on the command bridge while under way one morning. Do we look cold? We were! We went back inside the cabin not long after I made this selfie.

That said, the boat is very comfortable — at least to me. Remember, I’m coming to it from a slide-in truck camper. The boat is bigger. It has more windows and is brighter. It has a built-in inverter so I can use the microwave and coffee maker when I’m not plugged in. It has a generously sized aft deck with a table and seating for six — really! The command bridge seating is comfortable and a real joy when under way in warm weather. Yes, the bed is a weird shape, but it’s plenty big and I’m only sharing it with two tiny dogs.

Storage Cons and Pros

The front cabin has a clothes hanging rack that can accommodate about 10 hangers and, if they are used, the clothes block the use of some shelves and counter space there. There are a handful of other cabinets and a drawer that, if organized properly, can hold all my clothes. Or most of them. I use a large space under the bed to store off-season clothes; I have tank tops and shorts in there now. The trouble with that space is that you have to lift the mattress — which means unmaking the bed — to get into it. So it’s the kind of space where I’ll store things I can wait a week or two to retrieve — basically accessing it only when I change the sheets. The lower cabin has no storage other than a shelf along side the bed and one at the head of the bed. Whoever sleeps in there needs to stow their clothes in there or live out of a suitcase that can be taken out and placed on a table bench at bedtime.

Inside the main cabin is enough space to store dishes, silverware, utensils, pots, pans, and non-perishable foods — but not much else. The fridge is about the same size as my camper fridge, but the freezer is barely large enough to make and store ice and the door storage is very limited. There’s a compartment under the helm seat where I am storing tools and related items — including the extra remotes the boat came with for things like the auto pilot and search light. I’ve been storing manuals, log books, charts, and reference materials on the very large “dashboard” forward of the helm; that keeps them out of the way but easily accessible in transit.

There’s a ton of storage space under the aft deck — which is a blessing and a curse. A blessing because it offers space to keep relatively large things out of the way and dry but still relatively accessible. A curse because some of those things — like the generator — are heavy and they make the boat sit aft low in the water. This situation is not made any better by the fact that the dinghy, dinghy motor, and my electric bike are also in the back of the boat. There’s simply no place else to put any of these things. One of my projects when I get back to the boat later this month is to try to move things from under the aft deck to under the bed. There are a bunch of navigation reference guides in a box back there that will be the first to move.


Here’s one of my aft deck storage areas. This one is on the starboard side. From left to right is a waterproof box with the charging cable and accessories for my electric bike with a very complete Harbor Freight toolbox beneath it, an open plastic bin containing my 30 amp power cable and a heavy duty hose, my battery operated drill in its case, and a latching bin containing another hose and various hose-related items. The engine and thruster batteries are under the deck to the left in this photo and the inverter/charger is under the deck at the top of this photo.

I should add here that I’ve acquired several latching plastic bins to store loose items on and under the aft deck and under passenger bench seat on the command bridge. Storing like items together is the key (in my opinion) to organization and the ability to find things. There are a lot of things that come with the boat and will eventually be used but are not used very often. An example of that is the canvas covers for outdoor seating, the command bridge helm, and various windows and doors on board. Two shallow bins with latching tops make these easy to store upstairs under that bench seat where they’re out of sight and out of mind. And taller bins specifically chosen for the way they fit under the aft deck can store hoses, power cables, spare parts, and other smaller items that would too easily get lost if left loose.

Marina Life

So far, most of our overnight stops have been at full-service marinas. Slips or dock spaces include 30 amp power and water spigots. The marina facilities usually include restrooms and showers which we try to make use of. Marinas also usually have fuel and pump-out service; I like the idea of topping off when I get below 2/3 tank if the next fuel stop is more than 50 miles away.

Using a marina restroom means making less deposits into the toilet’s holding tank so I can do pump-outs less frequently. Regular use of the toilet means pumping out once every two weeks for just me or once a week for me and a friend; using the marina restroom 50% of the time doubles the amount of time between pump outs.

As for showering, the boat has a decent little shower that I’ve used exactly once. The water is plenty hot and the water pressure is good. The space isn’t that small, either. But you I usually get a better shower in the marina’s facilities. (There was one recent exception to this when I had the worst shower I’d ever had anywhere — at a marina.)

The boat’s galley is complete with a refrigerator, microwave, sink, two-burner stove, and oven. (It actually has two refrigerators and a wine cooler, but I keep that second fridge turned off for now.) I also brought along a one-cup electric coffee maker, a small Instant Pot, and a stick blender. So I can make just about anything in the galley that I can make at home. Still, it’s nice to go out for a meal once in a while. The marina at Grafton had an excellent restaurant right on the premises and we ate there three times. I had my first oysters of the season and first crawfish in years.

Making and Learning from New Friends

A marina’s amenities are part of the reason I like staying at marinas. The other part is meeting and socializing with other boaters.

I hosted my first ever “docktails” with folks in a Ranger Tug named Pony that was parked next to us at DuSable Marina in Chicago; it was their first ever docktails, too. We traveled together from Chicago to Ottawa, IL. We met their friends in a 42 foot Grand Banks named La Principessa (the Princess) at Jolliet and played tag with them at marinas, docks, and anchorages in Henry, Peoria, Barstow, Hardin, Grafton, and Alton. We met the super experienced owners and full-time liveaboards in the 48 foot Kadey Krogen named Nine Lives, sharing lock space and marinas with them several times on the Illinois River. Then there was the weather worried folks aboard the 40 foot Kha Shing Vista named Balclutha Too; I just discovered today that they lost one engine 100 miles north of Grafton — in an area with virtually no services — and managed to get to Portage du Sioux (between Alton and Grafton) for repairs. (If the timing is right, I might resume the trip with them at month end; it depends on how long their repairs take.) We also met sailors who were motoring with their masts stepped down in Black Majik and Yuca. I can track all of these people on the Nebo app and message them in the app or via text. It’s great to get news about conditions and facilities ahead of me on my trip from others as they pass through.

Most of these boaters have far more experience than I do and are willing to share what they know to make my journey easier. It’s a real pleasure to have them point out things I could do better or differently. I’m trying to be a sponge that soaks up experiences and information. These folks have been invaluable to me as sources of information and moral support. They’re one of the best things so far about my cruising life.

40-Day Opinion?

So far, I have to give my cruising life a two thumbs up. It’s not all sunshine and glassy smooth water, but it is the comfortable, doable, rewarding challenge that I hoped it would be.

I’m home now for three weeks to sell some jewelry at two shows, prep my house for its winter occupant, and touch base with local friends. I’ve already got my plane ticket back to the boat. Frankly, I’m counting the days until I can get back to it.

The 2022 Ranger Tugs/Cutwater Rendezvous

Posted on by
Comment

A great opportunity to learn new things and meet new people — and an excuse to take my new boat on a 250-mile round trip journey.

Last week, I wrote a blog post covering my maiden voyage in my new boat. The purpose of that voyage was to attend the 2022 Ranger Tugs/Cutwater Rendezvous, back at Roche Harbor on San Juan Island after a two-year Covid break.

In this blog post, I’ll try to fill you in on how this event was for me.

New Friends

I want to cover new friends first since that was the first thing that happened for me after securing my boat at J Dock. I was doing something inside the main cabin when a woman came up to my open window and invited me over to their boat for drinks. And just like that, I met the folks who sort of adopted me for the long weekend: Cindy, Tony, Joan, and Mark. They were all aboard Cindy and Tony’s 2022 Ranger Tugs R-43, which is the top of the line boat Ranger Tugs makes. With a length overall of close to 50 feet and a beam (width) of 14 feet, this boat has two good sized sleeping cabins and two full heads (bathrooms), making it a perfect boat for four people to be comfortable for an extended stay on the water.

The boat’s name: Infinite Loop. Cindy worked for Apple during the late 1990s and into the 2000s. She jokes — or maybe not? — that her Apple stock paid for the boat. (My Apple stock paid for my divorce so we both got good deals.)

I eventually took them up on their offer — I had to walk my pups, hose the salt off my boat, and do some organization things inside first. I brought vodka for a martini, made it with the wrong kind of vermouth (but I only used a little so it was okay), and joined them on the back deck at a table with plenty of room for all of us. (I joined them for dinner three times, too, and was glad to be able to contribute with my eggplant and goat cheese pizza and a vegetable dish.)

While we were sipping our cocktails that first night, another R-43 backed in across the dock from them and next to me. On board were Janet and Sandy who were all business as they coordinated their parking jobs with headsets on. Although they kept more to themselves, we did see a lot of them at events and on their boat.

We started referring to J Dock as where the cool kids were.


I love this group selfie that Mark took. Front row (l-r): Tony, Cindy, Joan (holding my dog Rosie), Mark. Behind (l-r): me (holding my other pup Lily), Janet, and Sandy (holding their dog Yogi Bear).

The Others

There were an estimated 200 Ranger Tug and Cutwater boats at the event. Ranger Tugs and Cutwater are sister companies owned by Washington based Fluid Motions LLC. The boats are very similar but I think Cutwater boats are built more for speed. All of their boats are built in Washington State, at a number of factory facilities in the Seattle area.


Here’s an aerial view of Roche Harbor shot from my drone. All of the boats on the Guest Dock on the right side of the photo were Rendezvous participants. J dock is on the other side of the marina; it’s the first dock on the right off the dock on the left. My boat is the smallest one there and I had to get the drone camera pretty high to see it behind the larger boats there.


The Home Screen of the Rendezvous app.

The Rendezvous had an app and the app had social networking capabilities. But although it let you share photos and comments, it didn’t alert you when you had a response to a comment or a private message. So although I tried to connect with other R-29 owners to see how they had modified their boats over the years and learn some tips and tricks from long-time users, and I got some responses, I could never quite connect with any of them. It was a bit frustrating.

But part of the problem is that I just kept very busy while I was at the event. Seminars, organized social events, socializing with friends, taking my pups for walks — I was constantly on the go and not consulting that app as often as I should have or making more of an effort to connect. My loss.


Here’s a look at the Guest dock at night. Our boats come equipped with underwater lights and colored lights for the aft deck and everyone seems to have turned theirs on.

The Seminars

What was keeping me busy was mostly the seminars. There were quite a few of them and very few overlapped. I attended a bunch but didn’t stay for all of the ones I attended. Here’s a quick summary:

  • Volvo Engine. This seminar was led by someone from Volvo that definitely knows its engines. It covered important maintenance and inspection details for the D4 (which I have) and D6 Diesel engines. I took four pages of notes. At the end, they gave out a USB drive full of factory publications to help me understand and maintain my engine. I’m determined to do as much regular maintenance as I can on the boat, not only to save money but to be more familiar with the boat’s components, including the engine.
  • Garmin topic TBD. The title of this seminar should have given all of us a warning: they had no idea what they were going to talk about. The Garmin representative rambled on somewhat incoherently about updating chart plotters and using Active Captain and buying maps. He bounced from one topic to another and made the mistake of taking questions so we all had to listen to the highly specific issues other boaters were dealing with on their setups. Cindy and Joan left first, I left after 20 minutes, and I’m pretty sure Tony and Mark left soon afterward. It was more confusing than enlightening.
  • Women in Boating. This was a major disappointment for me. I was hoping that she’d provide some insight into challenges facing women as boaters, but what she really presented was Boating for Dummies, that started with basic terminology like hull and gunwales. Her handout included images of every slide and I paged ahead to see if it would get any better. But no, it was more of the same. I realized that most of the women at the event were there with husbands or other male partners and I also understand that in most of these partnership, the man was doing the boat stuff and the woman was along to taken in fenders, tie up lines, cook dinner, and wash dishes. This seminar was geared toward them, not me. I left after 10 minutes.
  • Anchoring. I was very interested in this seminar because I plan to do some anchoring and had neither training nor experience. It was led by an R-29 owner named Glen Wagner, who also does most of his boating solo. (Actually, it turned out that he and I had a lot in common.) He covered basics and techniques in a presentation that was informative and entertaining. Although I didn’t take a lot of notes, I learned a lot.

There were other seminars, too, and although I thought I might want to attend them, I just felt as if I needed more down time. Being Whale Wise, Puget Sound Fishing and Crabbing 101, and Cruising Alaska were all topics I’d definitely explore later in my boating life, after I’ve gotten the Great Loop out of my brain and have brought the boat back to the west coast. The one about Exterior Boat Maintenance was being led by a guy who sold boat ceramic coating so I figured it was either going to be a sales pitch or concentrate on maintenance with that coating. (And yes, I could be wrong.) The boat insurance seminar was led by the folks I’d bought my insurance from, so I didn’t think they’d tell me anything I didn’t already know.

Sponsor Tables

There were tables at the event for each of the sponsors, including Volvo, Garmin, and the insurance folks.

Although we were encouraged to visit and ask questions, I hit a brick wall every time I visited the Garmin table. I needed to understand why certain features seemed to be missing from my chart plotters and why my remaining fuel indicator kept blinking at 103 gallons. The four guys there kept trying to me off to each other. Or to Volvo. After being passed from Garmin to Volvo and back to Garmin, I finally got a guy willing to walk back to my boat with me for a look. Sure enough, he passed me off to a Ranger Tugs guy who was busy doing something else but promised to stop by.

He stopped by later that day and showed me a feature on the Volvo engine monitor that I didn’t realize would do anything: a Back button. I thought I was already looking at the Home screen so I’d never tried that button. Back brought me to a menu that brought me to a Fuel screen. Duh. I felt pretty dumb.

In my defense, however, I did not receive a single manually that originally came with the boat. Although the broker and the surveyor both claim the manuals were on board, I went through every single compartment on that boat and did not find them. So it looks as if I’ll be downloading and printing the missing manuals so I can learn what I need to know when I need to know it.

Social Activities


Cindy took this photo of me and my girls sitting in front of my boat. The “Do It Now” sign was the only way I could provide the name of my boat for people who might be looking for it; I still did not have its name anywhere on it.

In addition to the seminars, there were social activities every night: a Sip and Chip Happy Hour on Thursday, a Margarita Happy Hour on Friday, and a Tropical Paradise Happy Hour on Saturday. I skipped Margaritas, but attended the other two with my new friends. That last Happy Hour included food, which I don’t think any of us expected, and was good enough to make a meal.

There were also games, including a scavenger hunt with flowers that I didn’t quite understand, a cornhole tournament and championship, a fishing and crabbing derby, a blindfolded dinghy race (which I wish I’d seen), and a tropical theme boat and costume contest.

I didn’t know about the boat decorating contest and was sorely unprepared, but my new friends kept adding flowers and leis to my railings. I even put an inflatable fish Cindy gave me on my VHF antenna. And I dug out a strand of solar powered fairy lights I used to use with my camper and strung them up on the bow. Cindy, Joan, and Janet were really into it and really decked out their boats. But I don’t think the judges came to J Dock; neither of them won.

At sunset, the marina did a colors ceremony that included playing music while they lowered flags. Flags were at half staff when Queen Elizabeth II died and taps was very sad. At the end of the colors ceremony, all the boat owners near their horns sounded them; I was never close enough to sound mine.


Roche Harbor Resort at night.


Here’s a post-sunset look at the ramp down to J Dock. It was gorgeous there, even at night.

One-on-One Training

I mentioned that Glen Wagner had an R-29 and it happened to be parked near mine. I arranged to meet with him in his boat to get part of the Ranger Tugs orientation that I missed out on by buying used instead of new.

The first thing that struck me was the modifications he’d made to his boat. He had removed two of the three rear deck seats — he said that they weighted 27 pounds each and he didn’t need them. He’d also removed his wine cooler and had somehow managed to get a door for the new cabinet space that matched all of the other doors and drawers on the boat. He’d moved the heating controls, too. But in looking around, I got answers to questions I had about my boat, including where to mount the fire extinguishers, which were on board but had never been mounted on my boat.

We went over his pre-departure check list, which was an enormous help for me. I wanted to create a check list and Sandy had given me his as a starting point — even though it was for an R-43 instead of an R-29. I grabbed a photo of Glen’s, which was a better starting point for me. He went over each item and went into detail about some of them. We opened the engine lid and looked at important inspection points inside. He filled my brain with new information, most of which was very important for me to know.

Then he came over to my boat to check my chartplotter set up. I’d been missing the Autoroute feature that everyone else seemed to have. Every time I told someone, “No, that button is not on my chart plotter,” they’d respond, “It has to be. Maybe you’re not looking in the right place.” Well, Glen came over and actually looked. It wasn’t there. (It turns out that the original owner only had the default charts installed; I need to buy G3 map cards to get additional information and that feature.) He also reviewed how to update fuel information in the chartplotter and explained why it was a more accurate reading when under way than the fuel gauge on the Volvo engine monitor.

Departure Day

The event officially ended Saturday evening with the Happy Hour and prize distribution. I went back to the boat and hung out for a while afterwards for some excellent nachos on Infinite Loop. I was exhausted — all the uphill walking I did every day closed all three of my Apple Watch rings daily — and turned in early.

In the morning, most folks headed out, including my new friends. We did a group photo — see above — and everyone packed up to leave.

Except me. I’d decided to stay an extra day to rest up and prepare for more training and a chartplotter update on my way home in Anacortes on Tuesday and Wednesday. So I mostly watched my friends get ready to move out. There were lots of hugs; Joan squeezed me long and hard enough that I thought I might pass out. Then Infinite Loop was on its way out of the marina. I sent my drone after it, but interference from the metal dock and the huge boats all around me prevented me from getting a good shot.


Here’s the best shot I could get of Infinite Loop cruising out of Roche Harbor. (I should have repositioned to a different location with less interference.)

Janet and Sandy left a short while later. I didn’t even bother trying to get a drone shot because I knew the drone would fail me.

I went for a walk with my pups and soon realized that the Guest dock was nearly empty. Most folks were leaving, going back to their marinas or continuing their cruises elsewhere. I took my pups to the dog park, where they just looked at the open, fenced in field as if they didn’t know what they were supposed to do.


I grilled up some halibut for dinner and ate it in the window seat facing out back.

And when I got back to my boat, the huge boats that were normally docked there started returning. I guess they’d just cleared the space for us. I wondered if another huge yacht was waiting elsewhere in the marina for me to leave.


My boat looks minuscule next to the large boats that returned to their slips around me on Sunday afternoon.

The colors ceremony was somber that evening. It was September 11 and we were asked to take a moment to think about the lives lost on 9/11. There were no tooting horns after Taps.


Sunset on September 11. I’d already removed the fairy lights and boat name sign I’d put on the boat in preparation for departure the next day.

I’d start my trip back to Olympia the next day, so I prepped my boat for departure as well as I could. I’ll tell you about that trip in another blog post.

Dr. Bronners is Not the Answer

Posted on by
11

I discover that a “do it all” biodegradable soap is not the answer to my on-the-water cleaning needs.

One of the things that bothers me about living on a boat is gray water — the water that drains away from sinks and showers. In the RV world, gray water is collected in its own separate waste tank. Although it can be dumped separately from black water (toilet waste), both tanks are often dumped together in a facility designed to receive it. But on a boat, gray water is drained directly into the body of water the boat is floating on. (Don’t worry; black water on a boat is contained in a tank and cannot be dumped anywhere on inland waterways or near shore.)

I remember the first time I realized this. It was in the 1980s and I was on a houseboating trip with some friends. One of us was washing dishes and I happened to look overboard and see soap suds on the surface of what I’d always thought was pristine Lake Powell. I was kind of horrified.

Lots of folks will argue that it’s “just a little soap” in a big body of water. And they would be right. But I tend to think on the macro level at times and thought: what if everyone just dumped their gray water into the nearest river, stream, or lake? Wouldn’t that hurt the fish and water birds?

So, like the environmentally conscious person I try to be, I thought I’d find a more environmentally friendly soap to use aboard my new boat, which I expect to be living on for months at a time.

Choosing Dr Bronners


Here’s what the Tea Tree scented Dr. Bronners bottle looks like.

Dr Bronner’s All-One Soap came to mind first. If you’ve ever been in a health food store or walked through the natural foods section of your supermarket, I’m sure you’ve seen it. It comes in plastic bottles absolutely covered in crazy fine print text. It’s supposed to be pure-castle soap and its website says its good for “Face, body, hair—food, dishes laundry, mopping, pets—the best for human, home, and Earth!” (I think someone in their marketing department needs a lesson in punctuation, although I am a fan of the Oxford comma.)

I think Peppermint may have been the original scent because that’s what I first used on camping trips years ago. It made my skin tingle. Later, I bought the Eucalyptus scent, which I preferred, for my campers. I used it in the bathroom for washing up, including showering. When I had really short hair, I used it for shampoo.

I figured that it would be convenient to have one soap I could use for everything, so I bought a large bottle and a small one — one for the galley and one for the head. I chose the Tea Tree scent because I wanted to associate a new smell with my new boat — I didn’t want it to smell like my RVs. And when I went out on my recent 10-day cruise around Puget Sound, that’s the only soap I brought along.

The Experiment

During the ten days I was away, I used Dr Bronners for washing anything that needed washing: my face, hands, body, and hair; dishes, pots, and pans; and laundry. And it didn’t take long to realize that Dr Bronners simply wasn’t doing it all, as its marketing materials claimed. Specifically:

  • As a body soap, it’s an astringent that sucks the oils out of your skin. While I like that in summer time when I’m sweaty and stinky, I don’t think it would be good in the winter. (I will likely continue to use it, however.
  • As a shampoo, it stripped all of the natural oils out of my hair, leaving it in a severely tangled mess. If I didn’t have the foresight to bring along some leave-in conditioner, I would have had to have my hair shaved off to remove the knots. (Knowing in advance how it was on skin gave me insight about how it might be on hair.)
  • As a dish soap, it could not sufficiently cut through grease, no matter how much I used or how hot the water was. No matter how many times I washed something greasy, there was always a thin, slick film left behind.
  • As a laundry soap, I just don’t feel sure that it really cleaned my clothes. I didn’t see any suds in the water, but since none of my clothes were really grimy, I have no way to judge how well it worked.

Before the end of my trip, I went out and bought a small bottle of Dawn dish detergent. It was pointed out to me that environmentalists use Dawn to clean oil off wildlife after spills, so there must be something environmentally friendly about it. (Or maybe it’s just more environmentally friendly than crude oil?) I just couldn’t deal with that layer of grease on my “clean” pots and pans.

Conclusion

As far as I’m concerned, the experiment is over. I’ll use up the rest of the Dr Bronners I have on board for washing my hands and face and showering. I’ll use my regular shampoo on my hair — heck, I take most showers at marina facilities anyway. I’ll use the same laundry detergent pods I use at home for my laundry, which is always done in a laundromat. And I’ll use Dawn (sparingly) for washing my dishes.

In the meantime, if you have any suggestions for more environmentally friendly cleaning products that actually work, please let me know. I want to do the right thing, but I also want clean things to be clean.

My Maiden Voyage in MV Do It Now

Posted on by
8

I start my first boat trip with a 10+ hour, 2-day cruise in the Seattle area.

In my last blog post, I wrote a little about closing on my new boat, naming it, and planning its first trip. On September 6 and 7, 2022, I made that trip. I’ll tell you a little about it here; let’s see how brief I can be.

Cruising with Larry

Imagine this: you’ve just spent a relatively large amount of money on a 33 foot (length over all; LOA) trawler with a 300 horsepower diesel engine, bow and stern side thrusters, three chart plotters, auto pilot, sonar, radar, VHF radio, and everything you need to cruise long-term on fresh or salt water pretty much anywhere in the world. You’ve stepped up to this boat from a 17 foot jet boat and your only other boating experience is perhaps a total of 100 days in motorboats, house boats, and a pair of cabin cruisers similar to the one you’ve just acquired. Would you take it out by yourself on a 120-mile journey in relatively unfamiliar tidal waters?

Well, you might, but I wouldn’t. I hired an experienced boat captain to cruise with me the first day.

His name is Larry and he came recommeded to me by another Ranger Tugs captain who was unable to meet with me on the date I needed him. I met up with him at the Edmonds WA ferry terminal parking lot. That was after making the 3-hour journey from Malaga, which began at 5 AM. From there, we headed on a roughly 2-hour drive through Seattle to Olympia where the boat lived in a covered slip.

We talked boats during that time. He had a good amount of experience on a variety of boats but didn’t know Ranger Tugs quite as much as I wished he did. It wasn’t the driving that concerned me — most boats this size drive pretty much the same way. It was the boat’s other systems I needed schooling in. But that didn’t really matter at that point. The most important thing was getting the boat started on what would be a two-day journey from Olympia to Roche Harbor on San Juan Island.

But first we needed to stop in downtown Olympia at the boat broker’s office to pick up the keys and a box of spare parts for the boat.

Then, at the marina, I needed to fill in some paperwork and get an electronic key for the dock gate. And a parking pass for the parking lot.

And then we needed to move a truckload (literally) of boxes, bins, luggage, and bags of stuff from the truck to the boat.

This is where things got screwy. We didn’t have time to offload all those boxes and put the empties back in the truck. All we could do was fill the rear deck and sleeping area and dining area with boxes and bags and luggage. It was noon by the time we were ready to go and we couldn’t wait any longer. We had 50 miles to cover in a boat that might cruise as slowly as 10 knots — neither of us knew.

 
 
I couldn’t unpack, so I just put the boxes, bins, luggage, and cooler wherever I could fit them.

I learned how to check fluid levels and a handful of other things in the engine compartment and start the engine. Larry cast us off and guided me as I backed the boat out of its slip, used the thrusters to pivot nearly 180°, and pull out of the marina.

It was remarkably easy. The secret is to not be in a rush. At all.

Of course, having a nearly windless, currentless departure with no other traffic helped.

We didn’t have time to plot our course on the Garmin chart plotters, but I’d plotted it on my iPad using Aqua Map. Larry had his iPad and Navionics. We weren’t going to get lost as we wound our way between the islands in South Puget Sound, under the Tacoma Narrows Bridge, and eventually past Seattle.


Underway just out of the marina. If you look closely, you can see Mt Rainier.


Approaching the Tacoma Narrows Bridge.


The Seattle skyline from Puget Sound.


My pups settled right into the lower berth, which was still stuffed with all kinds of equipment that needed to be properly stowed.

We started at the upper helm but, since it was cool, we decided to move to the lower helm, which is inside. There was some confusion about how to transfer the throttle control downstairs; it turned out that I hadn’t put it in neutral upstairs. (The boat has Idle Forward and Idle Reverse gears; I’d left it in Idle Forward.) Once we figured that out, we settled in downstairs, leaving the back door open. Lily and Rosie, my pups, settled into the lower berth, moving in as if it had been made for them.

The trip was uneventful. The water was remarkably calm for most of the ride and the channel was plenty wide enough that looking for buoys wasn’t a necessity. We set an RPM that gave us 10 to 12 knots. The engine sounded good. Everything worked.

Except the fuel indication on the chart plotter. It said we had 103 gallons of fuel on board, but it was blinking and didn’t change, despite the fact that we were obviously burning fuel. This bothered me but I wasn’t going to worry about it. (In hindsight, I don’t know why I didn’t worry about it; I should have. After all, how long had it been blinking 103 gallons? A year?) Near the end of the trip, Larry peeked at the gauges in the lower cabin and reported I had nothing to worry about — the gauge there said I had just over half a tank.

I drove most of the way. Larry and I chatted about various maneuvers. We had no time to stop and try anchoring or anything else. The clock was ticking and I wanted to be at Kingston before sunset.


Making lunch while under way.

Around 3 PM we were both really hungry. I gave the helm to Larry and made us some lunch. On the stove. There were pot holders there so I didn’t have to worry about the pan moving, even when it got a little rough. I had to dig through all the packed boxes to find the pan, plates, and silverware. And through the cooler to find the ingredients. I’d prepped some aromatic vegetables at home the night before and cooked them up with olive oil and butter. I added some pan gnocchi. Then, when everything was almost done, I added 12 ounces of sea scallops and cooked until they were done. We took turns eating. It was just as tasty as a first meal prepared in a new boat should be.

And then we were there, just outside the Port of Kingston. A very large ferry boat was crossing from Edmonds just as we arrived. I got back on the helm — upstairs, because the visibility is just better from up there — and brought the boat in slowly, again following Larry’s instructions. There was a bit of a headwind that turned into a crosswind as I turned to go into the slip. Larry had me cruise past the slip, then use the thrusters to make a 90° pivoting turn so I was pointing into the slip. I then drove in slowly, letting the wind and then the thrusters take me gently against the dock. Larry tied us up.


We did about 60 miles the first day, from Olympia to Kingston.

Then I was hurriedly gathering together his things and my checkbook and the dogs. The ferry had docked and he wanted to be on the return run to Edmonds where his car waited. I wrote a check and sent him on his way.

Organization — and a Guest

I walked my pups and went back to the boat to start unpacking.

It was a huge chore. I had about 75% of what I’d need on board in a large cooler and various boxes, bags, and plastic bins. Once I unpacked, I still had the cooler and bins. In a perfect world, I would have had a full day to unpack everything and store the empties back in my truck. But we all know this isn’t a perfect world. Not only did I have to unpack everything and find room for it, but I also had to find room for the empties.

While all this was going on, my Twitter friend Juliana stopped by. I knew that she lived in the area and had invited her. We’d never met in person, but we’d both worked with Lynda.com in the past — I’d been an author and she’d been an editor. She brought a bottle of wine and we made room among the boxes and general mess to sit at the table and drink it. All of it. I was feeling pretty relaxed when she left.

I got the organization job about halfway done, concentrating on the important stuff — the contents of the cooler; the cookware, dinnerware, and silverware; my clothes; and the bed linens. This is when I made two discoveries: First, I’d packed a bottom sheet but not a top sheet for the bed. Second, the custom bed cover hid custom sheets.


Here’s the bed’s custom mattress topper. This is the exact shape of the bed.

I should take a step back and talk a little about the bed. It’s a very odd shaped bed. Custom bedding was available for it on a website called YachtBedding.com and I’d already checked it out. But since I was not interested in spending $1200 for a set of sheets — yeah, I know I’m being a cheapskate here — I figured I’d just use two flat sheets, tuck one in all around as a bottom sheet, and deal with weird overhangs on the top sheet. If that didn’t work, I’d just cover the mattress and use a sleeping bag.

But the bed had not only the fitted bed cover, but a custom cotton blanket, a full set of those expensive sheets and, under that, a custom mattress topper. I was set!


Here’s what the bed looks like fully made with the linens the boat came with. (I washed the sheets at Roche Harbor and made the bed so it would look nice.)

But not that night. I was not going to sleep on sheets that might or might not be clean. They’d need to be washed. Until then, I’d have to use what I brought: a queen sized bottom sheet with my freshly washed queen sized comforter. Fortunately, I’d also brought pillows and clean pillow cases. Needless to say, the bed looked a mess when I was done.

I think I finally turned in a little after 9 PM. The marina, which is on the other side of a rock sea wall from the ferry terminal, was surprisingly quiet. I’m used to marinas being loud places with clanking sailboat rigging, but this place was almost eerie in its silence. Even the ferry boat’s coming and going was muted.


Just past sunset at the marina. Peaceful, no?

I slept like the dead.

Day Two: Going Solo

I woke at my usual time — around 5 AM — and set about making coffee. The boat was plugged into shore power so my one-cup drip coffee maker was available for use. I’d prepped it the night before so I was back in bed with a hot cup of coffee within minutes.

(And that’s a morning routine that I realize I need to change. I picked it up last year sometime — getting up early (as I usually do) and bringing my coffee back to bed with me while I catch up on Twitter, do some word puzzles, read, and/or plan my day. While it’s nice to have that relaxation time in a comfy place with my pups still sleeping beside me, it’s really cutting into the time I’d otherwise use to write or get things done. I skipped it this morning just so I could finish this blog post, which I started days ago. I think I need to stop being so darn lazy in the morning.)

When my pups woke up, I took them for a quick walk to a patch of grass just beyond the docks. Then back to the boat where I finished dressing, fed them, and kept poking around to explore my new surroundings. The lower berth was filled with things I needed to sort out: carpeting, table legs, tables, flagpole, fire extinguishers, PFDs, and other safety equipment.

I found the gauge Larry had read the day before, when he assured me I had more than half a tank of fuel left. It was labeled Water. So yeah: I had no idea how much fuel was on board.

By this time, it was nearly 7 and I took my pups out for a proper walk. There was a crepes restaurant on the corner and I waited patiently for it to open so I could buy a breakfast crepe and bring it back to the boat. It was huge but admittedly not very good. I ate half. Then I finished securing everything that needed securing inside. The sailboat that was parked at the fuel dock pulled away. It was time for me to pull out of my slip and dock for fuel. By myself.

Again, slow and steady is the way. There’s no reason to rush and the conditions, once again, were perfect. No wind, no current. I turned on all of my instruments and started the engine. Then I went out on the dock and untied the boat, leaving the aft midship line for last. The boat barely moved. I climbed aboard, went up to the command bridge, transferred the controls to that helm, and slowly backed out. Once I cleared the boat on my port side, I used the bow thruster to bring the front of the boat around to port. (I should mention here that because of the position of the rudder on this inboard engine powered boat, steering has no effect in reverse, although “prop walk” does tend to bring the stern to port a tad.)

I have to say that I impressed myself — and I am my toughest critic. I’d visualized my approach to the fuel dock and I think that helped a lot. I just eased over there and set the boat beside the dock, getting it to a complete standstill before the dockhand could grab a line.


My first fill-up. OUCH.

A while later, I was pumping diesel into the tank port. It was a thirsty puppy and took 92 gallons. (If you figure I have a 145 gallon tank, that means I only had 53 gallons on board — not 103 gallons or more than half a tank. It would have been enough to get me to my destination, but what if it hadn’t been? Better safe than sorry, no? And yes, I’ve since discovered not one but two fuel indicators; more on that in another blog post.) While filling up, I learned that the glug-glug sound near the end means to stop fueling now. I also learned how diesel fuel spill rags can soak up oil but not water.

While I was chatting with the dockhand, the subject of lines came up and I told him I didn’t think I had enough. Did they sell them in the office? He told me that they had a bunch of lines that they were giving away. I had my doubts, but followed him to a storage building and was rewarded with three brand new ropes, still in their packaging. “Defective” he said, but neither of us could find anything wrong with them.

I paid for the fuel, prepped the boat for departure again, and cast off. I made a graceful (i.e., slow motion) departure from the dock, using the throttle and my thrusters to get the boat turned around. Then I left the marina at idle forward thrust, which gave me about 3 1/2 knots. It was low tide and not difficult to see why staying in the channel was important — beyond it were what I’d call mud flats. Then I was out beyond the sea wall, slowing to let the ferry depart ahead of me, and then picking up speed to start my trip north.

And this is where I made my first error: when I came away from the marina and was in open water beyond the ferry path, I should have brought the boat to idle and retrieved my fenders. Instead, I let them “fly” for the entire trip to Roche Harbor. No harm done, but not good for the lines, the fenders, or the side of the boat. What’s crazy is that I had to drop down to idle anyway to come from the upstairs helm, which was chilly, to the more comfortable inside helm. Why didn’t I do it then? No idea, but I won’t make that mistake again.

The conditions started off very good, with smooth water as I headed northwest along Whidbey Island’s west shore. There was a ship channel that was well marked and I did pass one inbound ship along the way. I got to play with the AIS feature on my chart plotters.

AIS or Automatic Identification System is like ADS-B is for aircraft — a system that broadcasts and/or receives vessel information including name, position, speed, etc. What’s odd is that in the aviation world, ADS-B Out is required for all aircraft while AIS transmit is only required for commercial ships. And while ADS-B In is not required or even used on most general aviation aircraft, AIS Receive is widely available on boats with chart plotters. My boat, it turns out, receives AIS signals but does not transmit them. That means I can learn about at least half the boats I’ve seen in my travels but remain invisible to them. This is something that’ll cost about $1000 to “fix” by adding a Garmin AIS Blackbox Transceiver to transmit my signal. I’m not sure yet whether I want to make this investment.

 
I can see a ship and tap an icon on my chart plotter to learn more about it, including its name and speed.

While Admiralty Inlet wasn’t rough at first, the farther north I got the rougher the water got. It didn’t help that the current was against me, slowing me down. I’d been traveling with the RPM set at 2600, but when speed dropped below 10 knots, I upped it to 2700 and, later 2800. That got me more than 10 knots and, at times, up to 12. By the time I got into the Strait of Juan de Fuca, I was cutting through choppy waves, rolling, and getting splashed good enough to run my windshield wipers. My pups were not happy and I wound up putting them both on the bench seat beside me.

It was a 19 mile stretch across the strait with only the tiny Smith Island in the middle of it. I don’t know if I imagined it, but it seemed that the water calmed a little once I’d passed that island. The current changed, too, and was soon in my favor. It was pretty much rolling through the gap between Lopez and San Juan Islands, spitting me out into the San Juan Channel with SOG (speed over ground) in excess of 15 knots.

There was a lot of debris in the water as I continued up the channel, taking the wheel to steer around logs, sticks, and rafts of weeds big enough to hold sea birds. (Enroute, I normally use the autopilot’s Heading Hold feature to set a course that I can occasionally adjust with a push of a button, but when there’s serious steering to do, I take the wheel.) The minutes and miles ticked away. The water was calmer among the islands and it was more pleasant traveling.

I started seeing other Ranger Tugs going my way when I reached Spieden Island. I had been warmed to take the far pass into Roche Harbor, staying west of Pearl Island, so that’s what I did. Although I think I could have cleared the skinny water on the east side — my boat’s draft is only 2 1/2 feet — why take a chance? I discovered later in the week that a 43-foot Ranger Tug had gone the other way and had severely damaged one of its two pod engines.

Arriving at the Rendezvous

The purpose of the trip had been to attend the annual Ranger Tugs/Cutwater Rendezvous, which was the first held in more than two years (because of Covid). It was a huge event at Roche Harbor Resort and Marina which would eventually gather together more than 200 boats made by the same folks who made mine. There would be seminars and get togethers and a lot of fun — all of which I’d cover in another blog post.

For now, all I cared about was getting my boat into a slip.

The radio guidance was more like dealing with an air traffic controller than I’d likely ever experience again at a marina. One by one, a man apparently at the marina headquarters assigned slips to incoming boats and provided instructions on how to reach them. When it was my turn, I didn’t like his instructions at all. He wanted me to rig the boat to back into the dock. That meant removing my dinghy and bicycle and putting fenders back there. He didn’t seem to care that I was on board by myself and would have to reconfigure my setup while trying to prevent my boat from drifting into other traffic.

I tried. I really did. I got the dinghy down and on a rope tied behind me. And then I started struggling with my bicycle, which I’d fastened to the rails on the swim platform. And I said to myself, fuck no. I’m not dealing with this.

I went up to the command bridge, got on the radio, and told him I was by myself, I had too much to move around, and I just wanted a bow in starboard tie. Anywhere.

He sounded annoyed and told me to wait. Then he got back on and sent me to a slip on J dock. I was disappointed because I knew that’s not where everyone else was parking. I was being sent to the hinterlands because I didn’t want to back my boat into a slip on my second solo attempt to tock. (I’m counting the fuel dock here.) He assured me that other Ranger Tugs would be there.

By that point, I just didn’t care. I motored over to J dock where a dockhand waited to help me park. It wasn’t as smooth as my fuel dock parking job — possibly because I was pissed off and tired and people were watching — but I didn’t embarrass myself.


Do It Now docked at Roche Harbor.

I was very happy to shut down the engine. It had been a long day.


My first solo cruise was about 50 miles from Kingston to Roche Harbor.

You can read about the Rendezvous I went to Roche Harbor to attend in another blog post.

Planning My First Trip in Motor Vessel Do It Now

Posted on by
6

I have big plans for my first boat outing.

A lot of stuff has been going on in my life over the past two weeks. One of them came to a conclusion yesterday: I closed on the purchase of my new boat, a 2019 Ranger Tug R-29 CB.

I wrote more about the purchase process in my Great Loop blog. The final chapter can be found here. It was a surprisingly easy transaction with the only glitch being Citibank’s wire transfer processing and unbelievably crappy customer service. At 11:22 AM on September 2, I was the owner of an amazing, near-new cruising trawler.


My still unnamed boat in a photo taken by the surveyor as we motored in to the lift for a bottom inspection.

Do It Now

Amazingly, although the boat was three years old, it had never been named. That was good for me since there are all kinds of superstitions about renaming a boat and I didn’t want to deal with any of the weird ceremonies involved in changing a boat’s name. It meant I could name it whatever I wanted to. I chose Do It Now with a home port of Malaga, WA, and during the closing process I made arrangements to document it with the Coast Guard instead of titling it in Washington State. That means I can take the registration numbers off the hull as soon as I get the name put on.

Why Do It Now? If you’re a long-time reader of this blog, you may know that I feel that I wasted too many years of my life in a dead-end relationship, waiting for a partner to get his head out of his ass and start enjoying life. With him out of the picture, I was finally free to do my own thing — and I have been. I expanded my business, built a home, and started traveling more. But I wanted one more big challenge and had pretty much set my heart on cruising in my own boat. With the years ticking by quickly I realized that, at some point, a lack of physical fitness would prevent me from doing what I wanted to do. So if I wanted to start a new chapter in my life, I had to do it now.

It’s become a philosophy. Heck, I almost had it tattooed on my left hand near my thumb so it would remind me every day. I think buying this boat was a better solution.

Planning the First Voyage

As the purchase started coming together, I realized that there was a good chance that I could complete it before an annual event I really wanted to attend: the Ranger Tugs Rendezvous at Roche Harbor Marina on San Juan Island. Although it had been cancelled for the previous two years due to Covid, it was on for the weekend of September 8 – 11. I bought an attendee ticket and, booked a slip at the marina for September 7 -12. (Yes, I was so confident that the sale would go through that I booked a slip for a boat I didn’t yet own.)

I also plotted the route from Zittel’s Marina in Olympia, WA to Roche Harbor using Aqua Map, my iPad chartplotter of choice. I was shocked when I learned it was over 100 nautical miles. Not the kind of trip you can do in one day when you’re cruising at 10-12 knots. That meant an overnight stay along the way.


My entire route as plotted on Aqua Map. It takes me from Olympia past Tacoma, Seattle, and Edmonds in Puget Sound and then into the San Juan Islands area.

I arranged for an experienced boat captain, Larry, to join me on the first day of this journey to provide some much-needed training and orientation. I’d meet him at Edmonds on Tuesday morning and finish the drive with him to Olympia. That’s where I’d take possession of the boat and its keys. We’d offload my truck into the boat — I have a ton of packing to do — and then, after some orientation at the marina, head out along my route. The goal is to get to Edmonds by just after 4 PM, which I think is pushing it. I’d drop off Larry in Edmonds and motor across the channel to Kingston where I’ve already booked a slip for the night. (There’s no transient parking in Edmonds.) In the morning, I’d head out alone to finish the trip to Roche Harbor.

It is an ambitious plan and, if I didn’t already have quite a bit of experience last summer at the helm of a 2017 Ranger Tug R-27, I wouldn’t even consider it. Yes, my boat is larger — both in length and beam — but it has basically the same helm setup, right down to the autopilot, chart plotter, throttle controls, and side thrusters. I’m more worried about my arrival at Kingston, which might be after hours, than leaving Kingston or arriving at Roche Harbor the next day. I guess time will tell.

Anyway, that’s the current plan. I’ll write more about it when the trip is over. Stay tuned. Some fun, challenging times are ahead and I’m looking forward to sharing them.