Why It Took Me 6 Days to Change a Tire

Hey, at least I finally got it done.

Yes, it took me six days to change the tire on my cargo trailer. But before I explain, let me give you a little backstory. (Regular readers of this blog should expect that of me.)

About the Trailer

I own two cargo trailers.

One of them is a little 4×8 trailer I bought to haul my bees around in the summer months. Lately, while my truck is in California, I’ve been using it to haul pavers and mulch and anything I don’t feel like shoving into the back of my Jeep. It’s a nice little trailer, but isn’t really suitable for hauling anything that weighs more than 600-800 pounds.

Cargo Trailer
This cargo trailer really came in handy when I moved from Arizona to Washington state and needed to haul an extremely heavy helicopter landing platform and 600cc Yamaha Grizzly ATV.

The other one is a big 8 x12 trailer I bought back in Arizona in 2000 to haul furniture and other things related to the rental properties I used to own. It has a wood plank bottom, low metal rails, and a drop down ramp. In the past, I’ve used it to haul just about anything that wouldn’t easily fit into the back of a pickup.

I should mention — only as an amusing point of interest — that this is also the trailer that got swept downstream in a flood when I lived in Arizona. A dry wash ran through my property there and, for most of the year it was completely dry. I used to park this trailer in it. Bad idea. This trailer was washed a full mile downstream one day. I needed my neighbor’s backhoe to pull it out of the sand. (I just spent 30 minutes looking for the buried trailer photo I know I have somewhere and came up empty. Ugh.) Years later, before I moved to Washington, I replaced the tires, had the bearings repacked, and repaired the ramp, which was damaged in the flood. The trailer looks beat to hell but it’s actually still very sturdy and useable.

Parked Trailer
Here’s the trailer right after I offloaded it and parked it on the west side of my home.

When I got to Washington and my building was completed, I off-loaded the helicopter platform that had been on the big trailer for about two years and parked the empty trailer on the west side of my building, out of sight. Somewhere along the way, it got a flat tire, which isn’t too surprising given the number of construction nails that were still scattered around. But I didn’t need the trailer for anything, so I just put the repair on my list of things to do and promptly forgot about it.

Over the winter, I decided to store some extra irrigation hose and wooden pallets on the trailer — again, to get them out of sight. So I moved everything onto it and secured a big, white tarp over the top. It was ugly from the road, but I didn’t care too much. Winter was coming and I was leaving town anyway.

When I got home from my winter travels and the snow melted and the land started getting lush and green and beautiful, I decided I didn’t want to see the ugly trailer and its ugly white tarp parked next to my home, even from the road. I’d been storing my little trailer on the far east end of my property, near my bee yard. I can see it from my home, but it isn’t in my face. I figured I’d move the big trailer out there with it.

But first I needed to get that flat tire fixed.

Removing the Flat

On Thursday, I figured it was time.

I started by pulling off the tarp and offloading the nice, dry pallets I’d stored beneath it. The extra irrigation hose was light and could stay, at least for now.

Then I used my ATV, which has a hitch on the front end (for pulling the helicopter platform) to pull the trailer out of its spot beside my building and into the driveway in front of the last two garage doors. (One garage houses my absentee truck and the other houses my boat, which isn’t going anywhere anytime soon.) It was a tough tow, mostly because of the way the land has been sculpted there by my earth moving guy, Jeff. There’s a bit of a dip that the very flat tire had to “roll” through. But the ATV, in 4WD, managed it.

I took the trailer off the ATV hitch and put it on its support wheel. Then I used the jack from my Jeep to jack up the trailer where the bum wheel was. I didn’t lift it much — I knew enough about changing tires to know that you loosen the lug nuts while the tire can’t spin.

I grabbed the lug wrench from the Jeep and attempted to fit it over one of the bum tire’s lug nuts.

And that’s when I hit my first (of many) hurdle: the lug wrench wouldn’t fit. It was too small.

I didn’t even bother trying the one for my Honda. Instead, I pulled out my socket wrench set and tried the largest one I had: 3/4 inch. That didn’t fit either.

I hopped on my ATV and drove the half mile to my neighbor’s house at the winery. They were in the middle of building a new tasting room and I knew they had tools. After a nice chat with Kathy, I headed back with three different sizes of sockets, from 13/16 through 1-1/4. 13/16 was the right size, but the socket attachment was 1/2 inch and the largest wrench I had was 3/8 attachment.

At this point, I figured I may as well buy my own socket for the tire as well as the attachment I needed to use it with my impact driver and/or drill. So I headed down into town with the little cargo trailer behind me. I bought the tools I needed at the local Ace hardware store, then went to Costco to buy eight bags of potting soil for my garden. One thing I’ve learned living 10 miles from town is that when you need to go into to town for one thing, you should take care of a bunch of errands at the same time.

When I got back, I set up the new socket with my impact driver and went to work on the lug nuts.

They wouldn’t budge. None of them.

I tried my drill, which I thought might have more torque. Same result.

I sprayed some lubricant on them. The only thing I had was silicone. No joy.

By that time, it was getting late and chilly and I decided to call it quits for the day. I left the trailer and jack right where they were.

On Friday morning, I did some work on another project while I was smoking a rack of ribs on my Traeger. At lunchtime, I packed up the ribs and drove to my friend Bob’s house with that little trailer in tow. He was going to help me with a trailer wiring issue on my Jeep. We finished the ribs with sauce on his grill, ate them with some broccoli slaw I brought from Safeway, and took care of the Jeep wiring issue (which still isn’t quite right). Then he handed me a socket wrench with a 13/16 socket, a long handle, and a bar that fit over the handle.

I let him keep the leftover ribs and took his socket wrench home with me.

I gave the socket wrench/handle combination a try and it worked like a charm. It’s all about leverage. I loosened all the nuts, jacked up the tire a bit more, and removed the nuts with my impact driver/socket combination. Then I loaded the tire onto my little cargo trailer.

Fixing the Flat

On Saturday morning, I headed back into town with that little cargo trailer. I dropped off the tire at Discount Tire, then went to Lowes and bought 30 pavers and 30 edgers for another project. When I went back to Discount Tire, it wasn’t ready so I went home and got to work on other things.

Discount tire called later in the day to report that the tire was too far gone and would have to be replaced. Although the tire had been new when it had left Arizona in September 2013, it had spent more than a year sitting flat at the side of my building. What the hell did I expect? I told them to replace the tire and that I’d come get it on Monday.

The trailer sat there all Saturday and Sunday, jacked up on one side with my Jeep jack. I was glad I hadn’t parked it someplace where it would be in the way.

On Monday, I went down to town to fetch the tire. I left the little trailer behind; it still had pavers on it. I had the back seat out of the Jeep, so there was room there for it. They charged me $42 for the new tire, which I thought was quite a deal. Until the guy went to carry the tire out — it wasn’t my tire. It was a tiny tire, like one for my little trailer.

That led to confusion and a search. They asked me what size my tire was and, amazingly, I knew. They found one that matched, said it had been patched and not replaced, and gave me a refund for the $42 I’d paid for the wrong tire. Then they put it in a big plastic bag and loaded it into the back of my Jeep.

I drove to the local garden shop and bought eight lilac bushes that barely fit in back of the Jeep with the tire and drove home.

I did a bunch of stuff, then got around to putting the tire on. It was heavy. I rolled it over to the trailer, got the trailer jacked up a little more, and put the tire in place. Or I tried to. No matter how I positioned the jack, I couldn’t get the lugs lined up with the tire. I worked on it for at least 20 minutes, struggling with the weight of the damn thing.

The Correct Tire
I took a picture of the matching tire in case I had to show it to the guys at Discount Tire.

And that’s when I got the bright idea to look at the other tire.

And that’s when I realized that the wheels didn’t match.

Discount Tire had given me someone else’s trailer tire.

Fixing the Right Flat

I called them up and reported the problem. More confusion. They had to investigate. I gave them the make, model, and tire size of the right tire — I’d bought the two tires at the same time so they were a matched pair. They said they’d call back and they did about 20 minutes later. They’d found my tire, which had not been fixed. Again, I authorized the replacement and I told them I’d be back the next day.

On Tuesday, I went down into town with my little trailer and the mystery tire. I bought another 30 pavers and six bags of mulch at Lowes. Then I made the tire swap. I made them show me the tire before I settled up with them — it was the right one. This one, however, cost me $90. When I complained gently about it taking me three trips, they gave me a $30 off coupon for my next tire purchase. (Since all of my vehicles currently have new tires, I’ll likely never use it.)

Putting on the New Tire

I got home, parked the little trailer, and set about putting on the new tire. It’s amazing how easy the job is when you’ve got the wheel that lines up with the lugs. (Duh.)

I used my impact driver/socket setup to tighten up the lug nuts, then gave them an extra bit of tightening with Bob’s socket wrench. Then I lowered the jack and moved it out of the way.

I hooked up the big trailer to the Jeep and rolled it out my driveway and down the road. My bee yard is very close to the road down there. I found a spot clear of sagebrush and backed it into position. Then I disconnected it, lowered the front end to level it, and locked the hitch.

It only took six days to get the job done.

Low-Fat, Low-Calorie Raisin Bran Muffins

A variation of a Martha Stewart recipe.

This summer, after cleaning out my RV for the last time, I found myself with an unopened box of raisin bran cereal. I like raisin bran, but there are other cereals I like better. So I searched for a way to use up the cereal and remembered how I used to occasionally make raisin bran muffins. So I went in search of a good recipe that called for the ingredients I had on hand. I found this one on MarthaStewart.com.

I made them with just one substitution: I didn’t have whole wheat flour so I used just unbleached flour. They came out amazing: moist and tender. I stored the leftover muffins in the fridge and reheated them one at a time with a 30-second zap in my microwave.

Of course, the big drawback to the recipe is also what makes it moist: it contains oil, which is high in fat (duh) and also high in calories. Although the folks at MarthaStewart.com seem to think this is a “low-fat” recipe, it could be better. I decided to try again with a substitution that could make it better: using unsweetened applesauce instead of oil.

This isn’t something I dreamed up. I’d read it in other places and figured this recipe would give me a good opportunity to try it. Here’s my version of the recipe — not only did it come out great, but it’s about 80 calories less per muffin than the Martha version. Like the other version, this makes 6 largish muffins.

Ingredients:

  • Nutritional Info
    Nutritional information with the ingredients here. As you might expect, it’s pretty high in fiber.

    1 1/2 cups raisin bran. I used Kellogs, but you can use any brand. If you can get it without sugar-coated raisins (ick), go for it.

  • 3/4 cup 2% milk. You could probably substitute fat-free milk for even less fat and a lower calorie count.
  • 1 cup unbleached all-purpose flour. If I had whole wheat flour — it’s on my shopping list now — I’d do 1/2 cup of each.
  • 2 teaspoons baking powder
  • 1/2 tbsp cinnamon
  • 1/4 tsp salt
  • 1 large egg
  • 1/4 cup packed brown sugar. You could probably reduce the amount of sugar if you wanted to since the unsweetened applesauce is still sweeter than oil. That would further reduce the calorie count.
  • 1/4 cup sauce unsweetened applesauce. If you use sweetened applesauce, you might be able to completely omit the brown sugar. I don’t know; I haven’t tried it. I don’t buy sweetened applesauce.

Directions:

  1. Preheat oven to 400°F. Lightly grease a 6-cup muffin tin.
  2. In medium bowl, combine cereal and milk. Let stand until softened, about 5 minutes.
  3. Stir applesauce, egg, and sugar into cereal mixture and mix well.
  4. In a small bowl, thoroughly combine remaining ingredients. Fold into cereal mixture.
  5. Raisin Bran Muffin
    One of the drawbacks of substituting applesauce for oil is that the muffin sticks to the paper liner. The next time I make this, I’ll put the batter in the individual lightly oiled tin cups.

    Divide batter into prepared muffin cups. Bake 20-25 minutes, until toothpick inserted in the center of a muffin comes out clean.

  6. Cool in pan 5 minutes, then move to a wire rack. Store in a sealed container in refrigerator.

If you do make this, let me know what you think. I’m also interested in any substitution ideas you might have.

A Trip to Portland

An activity-packed road trip with a foodie bonus.

My helicopter was due for an annual inspection before the end of August. The Robinson mechanic with the local fix-it guys, Alpine Aviation, had moved on to another job elsewhere, so there wasn’t a qualified mechanic on staff to do the job. That meant taking it out of town to my backup “local” Robinson shop in Hillsboro, OR. I’d brought the helicopter there a few years before when I was in the same situation. They treated me fairly, recognizing that I needed the helicopter safe and legal but not necessarily factory-perfect. And because they worked on Robinson helicopters all the time, they had a lot of experience with the various things that needed special attention.

Kllickitat from the Air
After too much time flying in low-visibility, smoke-filled skies, it was a real pleasure to drop down into the Klickitat River Valley.

So on August 24, I left Wenatchee’s smoky skies and headed south with an old Macworld Expo friend of mine, Raines Cohen. Although the trip should have taken us about 90 minutes on a direct route, heavy wildfire smoke and a TFR near Mt. Adams forced us to go past Yakima and down the Klickitat River Valley, then down the Columbia River to Troutdale before cutting southwest to Hillsboro (HIO). Total time in the air was just over two hours. We caught a train to downtown Portland where Raines bought me lunch at a block full of food trucks. I had no time to dawdle; I hopped on another train to Portland International Airport (PDX) to catch a flight back to Wenatchee.

I’d originally planned to catch another flight back to Portland with a cab to Hillsboro to pick up the helicopter. When I asked Kirk if he wanted to join me and spend a few days in Portland, he suggested that we drive. I admit I wasn’t too happy with the idea. It’s more than five hours from Wenatchee to Portland and he’d have to drive back alone. But he said there were things we could see along the way. I’m always up for a road trip, so I cancelled my flight arrangements and made plans for the trip. That included getting a house-sitter — my friend Alix with her dog Remi — to watch the kittens I’m fostering in the garage and Penny the Tiny Dog, who I’d decided to leave behind to keep things simple.

Day 1: Wenatchee to Hood River

We left in the morning on Tuesday, September 1. We would have gotten an earlier start, but I had to drop my motorcycle off for servicing and the shop didn’t open until 9. So it wasn’t until after 10 AM that we rolled out of town.

Route 821
Yes, the freeway would have been quicker, but just look at the twists and turns of Route 821 in the Yakima River Canyon!

We took Route 2 to Route 97 over Blewett Pass. After a quick pit stop at a truck stop in Ellensburg, we continued south on a road I’d been dying to drive: Route 821. This road twists and turns inside the Yakima River Canyon, following the course of the river the whole way. It was a great drive, even in Kirk’s Equinox, but one of these days I’m going to get back down there on my motorcycle.

We got on the freeway near Yakima and took that to Route 97, which goes through Washington and Oregon into California. It’s the fastest route between Central Washington and northern California — the route I take when I drive between Wenatchee and the Sacramento area for frost work each spring. In this part of Washington, it cuts across the Yakama Nation, with wild horses sometimes visible grazing near the road.

One interesting stop along the way: St. John’s Monastery & Bakery. This is a Greek Orthodox monastery with a bakery operated by nuns. The bakery sells all kinds of Greek foods, including pastries, breads, ready-made meals, and honey. We bought and shared a baklava which may have been the best I’ve ever eaten. I highly recommend a stop here if you’re driving through the area. It’s the only thing in the Goldendale area worth visiting (in my opinion).

Stonehenge
At my request, Kirk hammed it up on the Stonehenge “altar.”

One of the reasons we took Route 97 south was because Kirk wanted to show me the Maryhill Stonehenge. This is a replica of the famous Stonehenge in England, built the way the original was originally built — in other words, not in ruins. It’s situated on a hillside overlooking the Columbia River. It’s a weird spot, mostly deserted but kept clean. We walked around the rocks and then hiked down to the gravesite of Samuel Hill, the man who’d built it. Hill was also one of the driving forces behind the construction of the amazing Columbia River Highway, which we’d drive over the next day or so.

We drove down the hill from Stonehenge and made a stop at a farm stand surrounded by orchards. Kirk bought a 20-lb box of peaches. I introduced Kirk to paletas (Mexican ice pops), one of my favorite local treats.

By this time, it was nearly 4 PM. We’d taken a lot longer to drive south than we expected. But that didn’t matter. We weren’t in a hurry. I had reservations for a place in Portland, but not until the next day. We could stay anywhere that night. I like that — being able to travel at my own pace, visiting places of interest that I stumble onto.

Kirk had always wanted to visit the Maryhill Museum of Art, so that’s where we went next. The museum is housed in a mansion built by Samuel Hill in the early 1900s. Although it wasn’t quite finished, it was dedicated in 1926 by Queen Marie of Romania; there are many paintings of her and furniture items she designed in the museum’s lobby. The museum also has a huge collection of Rodin sketches and sculptures, as well as a variety of other interesting collections. Although it had turned into a gray day, after walking through the museum, we took a nice walk on the grounds overlooking the river. If you like art and you’re in the area, it’s worth a stop.

Fashion Dolls
Théâtre de la Mode is an exhibit that shows fashions of post World War II France on 1/3 size mannequins.

To Rowena Crest
I had the pleasure of riding east on these switchbacks on my motorcycle back in 2011.

We headed west on Route 14, which winds along the Washington side of the Columbia River. By this time, it was well after 5 PM and time to start thinking about a place to spend the night. We crossed the river at The Dalles, got on Route 30, the Historic Columbia River Highway, and headed west on the Oregon side of the river. That brought us up a steep, switchbacked road to the Rowena Crest Viewpoint. This is a must-stop along the drive, with sweeping views up and down the Columbia River. For folks with time who arrive earlier in the day, there’s also a number of hikes that’ll take you higher onto the plateau to the south.

Rowena Crest View
The view from Rowena Crest on that gray afternoon. This shot is looking up the Columbia River toward Rowena and The Dalles.

We got back on Route 30, which dumped us onto I-84 after a while. We exited at Hood River. We then followed a series of signs for the “Historic Hood River Hotel,” winding up in town in front of a three-story brick building. Since I’ll take a night in a historic hotel over a night in a Quality Inn (etc.) any day — as long as it’s not crazy expensive — I voted to check it out. The room we got on the top floor was clean and comfortable for only $100. Best of all, the place was walking distance from numerous restaurants. The desk clerk suggested Kin Eatery, which was new, and that’s where we wound up. We had a great dinner with even better wine. (I’d link to their website, but it’s so completely useless that I don’t want to waste my time or yours.)

It had been a great, busy day. We both slept well.

Day 2: Hood River to Portland

The hotel had a very nice buffet breakfast that was included in our room rate. Fresh baked scones, yogurt, cereal, fruit, juices, and other healthy choices. And I got a latte. What else could I want?

We continued on our way, following I-84/SR-30 to the Bonneville Dam Fish Hatchery. I wanted to show Kirk the huge sturgeon I’d seen there way back in 2005, the year of my “midlife crisis road trip.” I don’t think he believed that the fish was as big as I claimed. But he is. His name is Herman the Sturgeon and he’s 10 feet long and 500 pounds. He’s still swimming around in the sturgeon pond, accompanied by several large friends, all of which are visible in a fish window or from walkways around the pond.

It poured like hell while we were at the fish hatchery, but we dodged raindrops and eventually made our way back to the car. From there, we went into the Bradford Island Visitor Center at the Bonneville Dam. There are quite a few displays there covering the salmon runs, dam construction, and native people. There’s also a fish ladder with a viewing window — quite a few salmon were running upstream. We left just as a tour was beginning.

Bonneville Dam from the Air
Here’s a view of the Bonneville Dam complex shot with my helicopter’s nosecam on my way home that Friday. The fish hatchery is in the lower right and Bradford Island is about dead center.

It was while we were at the visitor center that I listened to my voicemail messages and got some bad news. During the final part of the inspection the day before, the mechanics had found a screw and washer in the oil pan screen. They didn’t know where it had come from but they obviously had to find out. I called the maintenance boss to talk to him about it. He said he’d gotten some info from Lycoming, the engine manufacturer, and the guys were working on it. But it would definitely delay my pickup. Instead of coming for it on Thursday morning, as planned, it might not even be ready by Friday afternoon. This was very bad news for me since I had a rides gig on Saturday and three charters on Sunday. I told him to do the best he could and hung up. It looked as if at least one of us would be spending an extra day or two in Portland.

When we left the visitor center, we were dumped back on the freeway until we could finally exit back where Route 30 continued on its own. This is probably the most well-known stretch of the Columbia River Highway, where one waterfall after another tumbles off the cliffs alongside the road. There are countless hiking trails with ample parking and no shortage of scenery. I could easily spend a week just exploring this part of Washington on foot.

Multnomah Falls
The iconic Multnomah Falls.

We passed one waterfall after another, but didn’t stop. Our destination, which I hoped to make in time for lunch, was Multnomah Falls. This is the iconic waterfall of the Columbia River Highway — the one with the bridge across it. You know. That one.

We arrived at 11:30 and, by some miracle, got a parking space close to the front door. That was a good thing because it was raining again. I dashed inside the lodge while Kirk went in search of a restroom. I got us one of the last tables in the restaurant. I had a nice sautéed trout with vegetables for lunch.

Multnomah Trail
The Multnomah Falls area includes a trail with 11 switchbacks that climbs to the top of the falls.

After lunch, we headed out for a closer look at the falls. It had stopped raining by then and the sun was poking out. We did the quarter-mile hike up to the bridge, where we stopped and looked at the water falling from far above us. The trail continued and so did we.

Switchback Sign
Yep. 11 switchbacks.

It was a long hike to the top of the falls. Not distance — it’s only about a mile from the bridge — but in time. There are 11 switchbacks, each of which was marked so you could track your progress. The switchbacks were needed because we were basically climbing up the side of a cliff. I don’t do well on uphill climbs and I needed a lot of rest stops. Kirk was very patient. It rained on us, of course — hard at times — and we found shelter up against the large trees alongside the trail. There were plenty of people on the trail, but I wouldn’t call it crowded.

View from the top of Multnomah Falls
I reached far out with my camera and shot this view looking down the falls. If you look closely, you can see the bridge.

Eventually, we reached the highest point of the trail and started a descent to Multnomah Creek. A few steps down to a circular platform and we were there, at the top of the falls. I’ll be the first to admit that if I hadn’t been encouraged all the way by Kirk, I probably wouldn’t have finished the hike. But I was so glad I did! The view looking back down was amazing. We stayed for about 20 minutes. During that time, the rain stopped and the sun came out. It was a beautiful afternoon, with wispy clouds floating up the Columbia River valley.

Columbia River from the top of Multomah Falls
Here’s a view of the Columbia River from the top of Multnomah Falls.

We hiked back down and continued down Route 30. From that point, we made several waterfall stops: Wahkeena, Bridal Veil, and Latourell. We stopped and did short hikes at some of them. I tried Periscoping once or twice but didn’t have a good, strong signal. The weather pretty much held, although it did drizzle a bit while we were at Latourell Falls.

Wahkeena Falls Latourell Falls
Wahkeena (left) and Latourell (right) Falls are stops right along Route 30.

After some more twisting road that led away from the river briefly, we wound up at Vista House, yet another historic overlook along the road. The view was so spectacular — especially with the post-storm clouds and blue sky — that I took several pictures of that and none of the building itself. It’s a small domed building with a second floor, walk-around viewing area. I managed to capture a good image as I flew over it a few days later in my helicopter.

Vista House View
The view from Vista House that Wednesday afternoon.

Vista House from the Air
A view of Vista House from the air shot from my helicopter two days later.

Although the Columbia River Highway continued on toward Springdale and Troutdale, the scenic parts pretty much ended at Vista House. We continued down the road to I-84 and pointed the car toward Portland. I worked my phone’s navigation features to guide us to the AirBnB property I’d reserved for our overnight stay. We arrived at about 5:15 in a quiet Portland neighborhood, let ourselves in with the hide-a-key, and relaxed for a while.

Pok Pok
Pok Pok features indoor/outdoor seating.

Our hosts arrived a while later and after having a nice chat with them and marveling at the huge size of one of their cats, we headed out on foot for dinner. My Twitter friend Terry had recommended a Thai place called Pok Pok, whicih was about five blocks away. (I didn’t realize it when I made the reservation, but the AirBnB property I’d booked was within walking distance of one of Portland’s many foodie areas.) There was a wait to get in, but they had openings at the bar so we took two seats there. We ordered the Fish Sauce Wings that Terry had told me about, as well as Kai Tuun (a chicken dish) and Kaeng hang Leh (a pork dish). Kirk had a Thai beer and I had one of their weird drinks, a Lord Bergamot (Smith Teas bergamot tea infused vodka with Som honey drinking vinegar, orange liqueur, and soda on the rocks), which was so tasty I had two. Although the food was great, I didn’t think it was worth waiting for the amount of time we would have had to wait for a regular table. And when the two people who sat near us admitted to also being out-of-towners, I began to suspect that Pok Pok is a tourist joint. Still, no regrets. It was a great meal.

Afterwards, we walked down the block to Salt & Straw, a “small, hip ice cream parlor featuring unique, housemade flavors like blue cheese & olive oil,” according to Google. It had been recommended by our AirBnB hosts. The line stretched out the door about a half block and didn’t move very fast. I couldn’t imagine any ice cream being good enough to wait an hour for and neither could Kirk. So we had a pastry at the French bakery next door, sitting outside and watching the folks on line as we ate.

A nice evening walk back to our lodging finished the day.

Day 3: Portland

The only thing disappointing about the AirBnB place we stayed was breakfast: they put a French press and hot pot in our room and left cold cereal in the kitchen for us. While weak coffee and cold cereal is apparently enough of a meal for Kirk, I needed some decent coffee. So after getting dressed for the day, we drove about halfway to the K&F Clinton Street Coffeehouse and walked the rest of the way. I got a latte and a breakfast pastry; Kirk passed on a second cup of coffee. Afterwards, we took the long way around back to the car, walking on Division Street. We discussed whether Kirk would stay an extra day with me and he told me he would. Later, I booked the same place for that night.

We headed into Portland. Kirk wanted to visit the Lan Su Chinese Garden. We found the place, parked, and then discovered it wasn’t open yet.

So we walked to the destination I wanted to visit: the famous Powell’s City of Books. All I can say is wow. I’ve never been in a bookstore with so many books. With limited time — the meter was running at our parking spot 10 blocks away — I had to choose one topic to explore. I went to the Writing books area and found hundreds of books about writing. What’s neat about Powell’s is that they have both new and used books and don’t seem too worried about how much shelf space they use. It was an amazing selection. I bought two books, both of which were used and much cheaper than if they’d been new. I could easily spend an entire day in this bookstore, but I worry about how many books I’d carry out with me.

Lan Su Chinese Garden
Lan Su Chinese Garden is a beautiful oasis of nature in downtown Portland.

Back at the garden, Kirk fed the meter and bought tickets for the garden. It was a beautiful place, with a carp-stocked pond, Chinese style buildings, and lush vegetation, all surrounded by a tall wall that blocked out most views (but not sounds, unfortunately) of the city beyond. We spent about an hour wandering around while a tai chi class moved silently on a platform overlooking the pond.

From Chinatown, we went in search of lunch. I wanted to show Kirk the block of food trucks I’d seen with Raines two weeks before. I don’t think he understood that there was an entire block of them. I had a rough idea of where it was so we moved the car and parked near there. After walking around for a while, trying to find something that looked remotely familiar, I finally asked for directions. The place we wanted was the block bordered by SW Alder, SW 10th, SW Washington, and SW 9th. It’s a full block lined with at least 50 food trucks selling all kinds of food. We walked the entire block, looking for something that struck our fancy. (I’d had a gyro two weeks before but wanted something more exotic.) Finally, we split up. I had a Tangine meal from a Moroccan food truck and Kirk had something Asian.

We ate on a bench in nearby O’Bryant Square, a park with a weird collection of people. I’m not sure if Kirk realized that the woman sitting at the far end of our bench, tapping away at her smartphone with long, manicured fingernails, was actually a man. The two of us did spend some time wondering why an extremely clean and well-dressed Hispanic man, who had a smart phone, was eating food from the garbage. And we disagreed entirely about the musical talents of the homeless-looking man who strummed away on a guitar in the middle of the crowd — I said he had no talent but Kirk was more inclined to think he did. Whatever. The highlight of the park — if that isn’t enough — was the bicycle pedal driven blender some guys were using to make and sell iced smoothies. They gave me a sample as we walked by for a closer look and it was awful.

After a walk in Pioneer Courthouse Square, we got back in the car and headed out to Washington Park in search of a hike. We’d been directed to the Hoyt Arboretum visitor center. That’s where we got a nice trail map and picked a combination of several trails that wound through tall pine forests. Kirk knows a lot about trees and shared some of his knowledge of what we saw. There’s a stand of giant redwoods and even a few sequoias in there and our path took us past all of them. Of course, it rained when we started the hike, but I kept dry in a $3 poncho I bought at the visitor center. I was seriously tired of being wet. But it was a pleasant walk all the same and, for most of the walk, the sound of the city and highway faded away.

I should mention here that I’d been to Washington Park’s International Rose Test Garden a few years before and although we didn’t visit it on this trip, I do highly recommend it.

Afterward, we headed back into town. I wanted to visit the Pendleton Home Store with the thought of buying a king-size blanket for my bed. I’d gotten a bedspread months ago, but thought I could do better. We found the store and parked nearby, then spent some time browsing the store. I worked with a salesperson to go through the catalog for options. Unfortunately Pendleton doesn’t carry all of its styles in king size and, if I’m going to spend $400 for a blanket, I have to really love it. So I walked away empty-handed.

It was nearly 5 PM when we headed back to our lodging. We relaxed for a while before heading out to dinner. We walked again — the weather had cleared out and it was very pleasant — this time going to Bollywood Theater, an Indian restaurant recommended by our hosts. I snagged us a seat inside and we waited on line to order. I can’t really remember what we ordered, but we shared it and it was delicious. Afterwards, I checked out the attached Indian market, where I could buy all the grains and spices I needed to make authentic Indian food. Unfortunately, I hadn’t come with any lists of ingredients I’d need in the future. Next time, I’ll be better prepared. I really love Indian food.

We got lucky on the way back to our room. Salt & Straw’s line was much shorter and, not willing to leave the area without a taste, we got on line. Ten minutes later, we were inside, tasting some of the unusual flavors they offered. I tasted Pear and Blue Cheese. It was interesting, but I ended up with a half scoop of Freckled Woodblock Chocolate and a half scoop of Honey Lavender. They were both good, but next time I’ll go for the Stumptown Coffee & Burnside Bourbon. (Don’t know how I missed that.)

Ice Cream Flavors
The flavor board at Salt & Straw.

We took a different route back to our room and settled in for the night, exhausted from a full day.

Day 4: Portland to Hillsboro to Home

Kirk had his weak coffee and cold cereal breakfast again. I tried the coffee again, but really couldn’t drink it. Then we packed up and said goodbye to our host. I navigated us to Hillsboro, which is southwest of Portland. Along the way, I suggested a few return routes to Kirk. The weather looked good and I know he wanted to make a few stops, possibly for some hiking, along the way.

Undressed Helicopter
Despite being partially undressed, my helicopter was almost ready to go.

My helicopter was out on the ramp, running with a few panels still off when we arrived. That was a good sign. It meant it was mostly assembled. Kirk came inside the shop with me were I chatted with the mechanics. They needed a few more hours. That was no problem; I’d rented a car from Avis for the day and would keep busy while Kirk started the long drive home. So Kirk dropped me and my luggage off at the Avis desk nearby and we said our goodbyes. I got the keys to a small car that would cost a whopping $30 for the day, loaded up my stuff, and headed out on my own.

I got coffee and a breakfast sandwich at a local coffee shop. Hell, I have my priorities straight!

Then I went shopping. I found a Trader Joe’s and stocked up on the various things they sell that I really love. I also snagged a 2-lb box of fresh figs, which I love. Then I stopped at a number of other places: Pier 1, Michael’s, Sportsman’s Outfitters, others. I bought a few small things along the way — after all, they needed to fit inside the helicopter. I went into REI and bought Kirk a map and book about the Pacific Crest Trail, which he kept telling me he wanted to hike. Around then is when my phone rang. My helicopter was ready.

I headed back, returned the car, and managed to carry all my luggage and purchases down the ramp to my helicopter. I stowed it on board and went inside to settle my bill and order some fuel. The bill was a lot higher than I expected, mostly because of that damn screw, which required 14 hours of labor to replace in the oil pan baffle. Sheesh.

I was airborne by about 3 PM. It didn’t take much research to realize that a direct route home would not be possible. There were storms with low clouds to the north, heading east. I figured I’d follow the same route I’d taken down two weeks before, but was over Klickitat when I realized even that would be difficult. So instead, I headed east to the Columbia at Mattawa and followed the river up from there. I wrote about part of the flight elsewhere in this blog and have shown some of the photos my helicopter’s nosecam captured in this post.

Multnomah Falls from the Air
Here’s one more photo: Multnomah Falls from the air, shot on my way home.

I was home by 5 PM and put the helicopter away. Penny was very happy to see me. Kirk got home an hour or two later. He’d taken his time on the way home, making a few stops along the way.

Postscript

That trip to Portland was likely my last trip with Kirk. A few days after our return from Portland, I ended our relationship.

Things had started off very well, but soon settled into the kind of frustrating rut you’d expect when two smart people, set in their ways after 50+ years of life experiences, end the good-behavior courtship phase of the relationship and reveal what they’re really all about. I realized that we were not as compatible as I’d hoped and pulled the plug before either of us could get too emotionally involved.

If there’s one thing my disastrous marriage taught me, it’s this: I’d rather be alone than with the wrong man. Life is too short to let someone else make you unhappy.

So I’m single again, without any new emotional scars, enjoying life on my terms. But I’m still keeping an eye out for a guy who might be the right companion for future adventures.

I’m thinking of the Florida Keys in November. Any takers?

Creating Defensible Space

Fire season is serious business in the west.

Every fire season seems to get a little worse in the west — particularly in the Pacific Northwest where I now live. For the past four summers, we’ve had widespread wildfires, most of which were started by lightning strikes. Fires have been particularly threatening, if not downright damaging, near my new home:

  • In September 2012, lightning strikes started over 100 wildfires from Blewett Pass to Lake Chelan. Visibility dropped down to less than 1/2 mile in smoke and mandatory evacuations affected the Wenatchee Heights area that was my temporary home not long after I left for Arizona.
  • August Fire
    I was at a party at the airport on the evening of August 10 while Jumpoff Ridge was burning.

    In August 2013, lightning strikes started a handful of fires on Jumpoff Ridge, the cliffs that tower behind my current home. Although I’d just purchased the land and didn’t have anything on it, I was as alarmed as my neighbors when my road was put on mandatory evacuation, mostly because firefighters feared that burning debris would tumble down the cliffs and start new fires on our level. (Fortunately, that didn’t happen.)

  • In July 2014, more than 300 homes were destroyed when a fire hit the community of Pateros, about 45 miles upriver from Wenatchee. Other fires up the Methow River near there destroyed forests, orchards, and a few more homes.
  • Sleepy Hollow Fire at Night
    I shot this photo of the Sleepy Hollow Fire on the night of June 28, 2015 from my deck using a 300 mm lens. It isn’t cropped. Although the fire was more than 8 miles from my home, I found it terrifying and could not sleep that night. A pair of heavy rainstorms the next day put the fire out — and started the Wolverine Fire up near Lake Chelan that’s still burning today.

    In June 2015, the Sleepy Hollow fire destroyed more than 20 homes in a Wenatchee subdivision overlooking the town. Burning embers from the fire traveled on the wind and touched off fires a half mile away, destroying 3 warehouses and fruit packing and storage facilities.

As I write this, there are dozens of fires all over Washington, Idaho, and Oregon. These fires are growing at alarming rates. The Okanogan Complex Fire, for example, started on Saturday, August 15 — that’s just 8 days ago — and has already grown to 227,206 acres. That’s 355 square miles — larger than the entire city of New York (all five boroughs).

Can you imagine all of New York City burning in a week?

And that’s just one of the monster fires. Chelan Complex has burned 87,412 acres in the Chelan area, North Star has burned 132,000 acres on the Colville Indian Reservation, and Grizzly Bear Complex has burned 59,150 acres in the Umatilla National Forest. The Interagency Inciweb website is currently tracking 26 fires in Washington State alone. The President has declared Washington a disaster area. This is some serious shit.

Although the closest fire is at least 20 miles from here, a wind shift has brought smoke into the valley. Visibility is less than 3 miles — I can’t even see the airport from my home. The smell of smoke is in the air. I spent much of yesterday outdoors doing light work and wound up with a sore throat from breathing smoke.

Visibility.jpg
On Friday, the air was very clear, although I could see the smoke cloud coming our way. This morning, the air is thick with smoke. I can barely see the buildings at the airport just 3 miles away.

The scariest part of fire season for those of us who live on the outskirts of town, surrounded by natural vegetation, is the fact that it doesn’t take much to start one of these crazy fires. Lightning is the most common cause, but fires have also been started by cigarette ash, sparks from chainsaws or mowers or ATVs, and even cars with hot engines parking on tall, dry grass. If Mother Nature doesn’t start a fire, some careless idiot might.

As you might imagine, the idea of “defensible space” is on many people’s minds. In theory, it means keeping enough clear area around your home so that firefighters can defend it from wildfire. That usually means cutting down trees and bushes and trimming long grass, surrounding your home with heavily irrigated vegetation such as green lawns or orchard trees, and removing any firewood or scrap wood piles near your home. If your home does not have defensible space, not only is it more likely to burn in a wildfire, but firefighters may not even try to defend it because of the danger it could put them in.

I did much of this over a month ago when I used my string mower to cut back the tall, dry grass on the side and back of my home. I debated cutting a few of the small sagebrush in the area — they burn hot and fast when ignited — but left them. The other two sides of my house have concrete and gravel and a small lawn.

Of course, some of us take it the next step by installing sprinkler systems that can be turned on, when needed, to soak the area. I did that the other day. I drove two 6-foot T-posts into the ground, one at each corner on the road side of my home. Then I fixed 50-foot sprinkler heads to the top of each one. I ran hose from my shed — which has extremely high water pressure — to the first sprinkler and another hose from that one to the second one. When I turned them on, they provided coverage along the entire road-side of the building, as well as about 50 feet down the front and back.

Sprinklers
Here’s my sprinkler setup on the road side of my home. I do need to move some of the scrap wood there, or cover it with some of the metal panels I have.

I want to add a third sprinkler to the roof of my shed, which would protect the shed and chicken coop. A fourth sprinkler head can be mounted on my deck in the other back corner of the building to provide some protection there.

My friends have been asking me whether I have a generator for the water pump. They assume I have a well. I don’t. I have city water which should keep flowing as long as the water company keeps it coming. I guess I should hope that they have generators.

Yes, I know it isn’t perfect, but it’s better than nothing.

The good thing is, my building is made of metal. So flying embers landing on the roof or against a wall should not be able to start a fire. There are some exposed wood beams, however, and I’m not fooling myself into thinking the building is fireproof. As too many folks around here have learned over the past few years, even metal buildings can burn if they’re subjected to enough heat. My goal is to prevent that heat from getting close enough.

I’m not the only one thinking about fire. Kirk has moved his vehicles into his orchard, which is far less likely to catch fire if fires come through the canyon where he lives.

Anyone who lives in an area prone to wildfire damage who doesn’t create defensible space around their home is an idiot, plain and simple. As we’ve seen this year, even homes in subdivisions that are normally safe from wildfire danger can be completely and utterly destroyed. Why would anyone fail to take steps to protect their home before such protection was absolutely necessary?

When the fires come, you often don’t have time to act before evacuation. I feel a bit of comfort knowing that I can get my sprinklers going in a matter of minutes now because they’re already in place. This might mean the difference between keeping my home standing and losing everything I own.

Construction: Pergo Installation Time-lapse

A task I thoroughly enjoyed!

On May 20, 2014, I began blogging about the construction of my new home in Malaga, WA. You can read all of these posts — and see the time-lapse and walkthrough movies that go with many them — by clicking the new home construction tag.

I got a pleasant surprise yesterday: I actually had fun installing the Pergo laminate wood flooring in my bedroom.

The job was remarkably easy once I got the hang of it. I started on the far left end of the room, positioned a piece about 1/8 inch from the wall, and slipped the tongue at the top into the groove of the previous piece at about a 30° to 45° angle. Then I gently rocked it up and down until is snapped down into place. The next piece went pretty much the same way, but also required me to bring the left edge against the right edge of the previous piece and make sure that snapped, too.

Cutting was the most challenging part. Although most cuts were simple straight cuts I did on my miter saw, I did occasionally have to cut around door openings and the like. In some cases, I had to draw pictures of the final piece with measurements. I know that sounds weird, but Pergo pieces can only be installed in one direction and if you screw up a cut, chances are that piece will be unusable as intended. If you’re lucky you can use it for something else. But if you do something seriously dumb — like cut off both ends — the piece becomes garbage. I screwed up two pieces during this installation, which I don’t think is that bad, considering it was my first full room.

Floor Installation
Here’s what the floor looked like when I took my lunch break. I was almost done!

As I worked, I found myself thinking about the sign I’d seen in Lowe’s offering installation at a sale price of 99¢/square foot. I can’t believe people would pay that when it’s so easy to do yourself. Yes, having the right tools does make the job easier — I had a miter saw, a table saw, a special pull bar designed for floating floor installations, and a rubber mallet — but even a battery-powered circular saw with a good blade would have been enough. The way I see it, I had a rewarding DIY day, got to play with my power tools, and saved $288.

If you want to see the narrated time-lapse video, here it is. I figure that if you deduct the amount of time for the two breaks I took while working, I probably put about five hours total into this job. I’m looking forward to finishing up in the living room and hallway — probably next week when the kitchen is done.