A Full Fourth

Probably the busiest Fourth of July I’ve ever had.

These days, I’ve been challenging myself to keep busy. Downtime between jobs has been damaging in the past, causing depression, frustration, and weight gain. I began fighting back last summer and remain determined not to spend time sitting on my ass when there are better, more interesting things to do. And let’s face it — almost anything is better than sitting around on your ass, letting the days of your life just tick away like a clock with an aging battery that can’t be replaced.

I try to sketch out a rough plan for each day of my life. Sometimes I tweet what I’m tentatively planning. Sometimes I don’t. Having a rough idea of what I plan to do helps keep me focused. Stating it publicly makes me responsible for doing — or trying to do — it. But I always let things take their course when I can. After all, no plan is set in stone. Spontaneity is what makes live truly interesting.

Yesterday, July 4, I set a busy schedule for myself. But I did even more than I planned. (And boy, am I feeling it today!)

Ross Rounds

As the time on that tweet hints, I wake up very early nearly every morning. Although its great to get an early start on the day, there’s a limit to what you can do that early when stores are still closed and friends are still asleep.

So while I sipped my morning coffee, I assembled my Ross Rounds.

Ross Rounds
Completed Ross Rounds. Photo from the Ross Rounds website.

Ross Rounds are a comb honey system that makes it possible for bees to produce packaged honey comb. You set up the special frames with plastic rings and pure beeswax foundation and insert the frames in their custom hive box. You then put the box on top of a honey-producing hive of bees. Eventually, the bees move into the Ross box and begin building and filling honeycomb in the special frames. When the rings are completely full of honeycomb and honey, you remove them, cover them, label them, and either sell them or present them as gifts to friends.

Ross Rounds Frame
Here’s a fully assembled Ross Rounds frame.

Assembling the frames took some doing. I had to split each frame, lay in the ring halves and snap them into place, lay in a sheet of wax foundation, and snap the frame closed. The ring halves only go in a certain way, so much of the time was spent lining them up properly. But once I got the hang of it, the process went quickly. I got all 8 frames, with 4 pairs of rings each, done in about an hour.

I’m not sure when I’ll be able to use the Ross Rounds system. I’ve been told that because I started my bees so late in the season I probably won’t be able to take any honey from them. They’ll need all that they create now for winter. But I’ll do a hive inspection on my first hive — probably today — and see how much of their top hive box is full. If it’s more than 80% full, I’ll add a queen excluder and the Ross Rounds frame and see how far I get by the end of the season.

Motorcycle Ride

Meanwhile, I was texting back and forth with another early riser, my friend Brian, who lives in Wenatchee. He’d seen my plan for the day on Facebook and was wondering if I wanted company for my motorcycle ride. After some texting back and forth and a call to my friend in Chelan — who I woke at 8 AM! — we decided to ride up to Silver Falls together and do a hike before going our separate ways for the day.

Penny on my Motorcycle
Here’s Penny in her dog kennel on the back of my motorcycle. (Yes, she fits fine in there and can move around freely.)

Penny the Tiny Dog and I were at Brian’s apartment at 9 AM. Penny rides with me on the motorcycle. I bungee-netted her hard-sided dog carrier to my motorcycle’s little luggage rack. It’s rock solid there. She rides in the dog carrier behind me. I don’t think she actually likes the ride, but I do know that she likes coming with me wherever I go. So when I lift her up onto the motorcycle’s luggage, she scrambles into her carrier without protest.

What’s weird is when we stop at a traffic light and she barks at other dogs she sees.

Brian rides a cruiser — my Seca II is more of a sport bike — and he led the way, keeping a good pace. We made the turnoff at the Entiat River about 15 minutes after leaving his place. We both thought Silver Falls was about 12 miles up the river, but a sign about a mile up the road said that it was 30 miles. I saw Brian look at his watch as we rode past the sign. He had a BBQ to go to that began in early afternoon; I had other plans, too. But we kept going. We’d make it a short hike.

I really enjoy riding my motorcycle in Washington State. This road, which wound along the banks of a rushing river, reminded me of the riding I’d done in New York State years before: mountains, farmland, trees, and cool, fresh air. I think one of the reasons I stopped riding motorcycles when I moved to Arizona is because it was simply not pleasant. Too much straight and flat and hot and dry. The road up to Silver Falls is full of curves and gentle hills, with orchards and hay fields forests along the way. Every twist in the road brings a new vista in the granite-studded canyon. Every mile brings a different sensation for the senses that are switched off inside a car: the feel of temperature and humidity changes, the smell of fresh-cut hay or horse manure or pine. This is part of what makes motorcycling special.

We arrived at the parking area, which had only one car. It was just after 10 AM. I got Penny out of her box and on her leash. We stripped off our riding gear and started the hike.

Silver Falls

This was my second trip to Silver Falls. My first was back in 2011, not long after I had my motorcycle shipped from Arizona to Washington. I blogged about that trip here. And, if you’re interested, you can read more about Silver Falls on the Washington Trails Association website.

Brian at the Creek
Here’s Brian alongside the creek. Penny refused to pose with him.

Penny and Maria on Bridge
Brian shot this photo of Penny and me on the bridge near the top of the falls.

The three of us — Brian, Penny, and I — headed up the trail together, stopping now and then to take photos. The stream was rushing wildly, with crystal clear water cascading over rocks and logs in the stream bed. We followed the same path I’d followed on my first trip there, taking the trail on the right up to the top of the falls and coming back the other side. The temperature was perfect — a bit cool in the shade but nice and warm on the wide switchbacks in the sun. Brian led at a fast pace and I did okay keeping up. I remembered my first trip there when I was still a fatty and how long the hike up to the top had taken. What a difference 45 pounds makes!

We ran into some other hikers on their way up the other side as we headed down. Because of time constraints, we only spent about an hour and a quarter there. It was 11:15 AM when we geared up and headed out.

Because we were going our separate ways and I was running late to meet my friends in Chelan, Brian let me lead the way with the understanding that I’d go at my own pace. I let it rip and covered the 30 miles in 30 minutes.

Blueberry Hills

It was 11:45 when I reached the junction of Entiat Road and Route 97A. I had a choice: continue with my plan to visit friends in Chelan or head back to Wenatchee Heights and take it easy for a while before heading out to the BBQ that afternoon.

I turned left toward Chelan.

There were a lot of cars on the road, but they kept at a good speed just over the speed limit. I fell into place behind them. It was a lot warmer back on the main road, but not too warm for my denim jacket. The road left the river, passed through a tunnel, and climbed into the mountains. It crested and started down, with beautiful Lake Chelan spread out before me: blue water surrounded by green orchards and vineyards capped by a perfectly clear blue sky.

I pulled over in town to get my friend Jim on the phone. He and his wife Teresa agreed to meet me at Blueberry Hills, a you-pick blueberry place and restaurant in Manson. Penny and I stopped for gas along the way. We wound up behind Jim and Teresa’s car as they pulled into the Blueberry Hills parking lot.

They had their dog, Zeus, a red heeler puppy with them. Penny and Zeus became friends months ago when we were in California on a frost contract with the helicopter. Zeus was much smaller then. He’s getting close to full grown now and is a lot bigger than Penny. They looked genuinely glad to see each other.

We climbed the stairs to the outside patio overlooking the blueberry fields. Jim and I went in to order lunch. I bought the dogs a pair of frozen beef bones, which the restaurant sells for their four-legged customers. Penny and Zeus got right down to business. When our food came, so did we. Blueberry Hills makes excellent food.

We talked about all kinds of things while waiting for our food and then eating. Teresa had just come back from a visit to their daughter’s family in Anchorage. Jim, like me, was just recovering from a hectic week of cherry drying. We had stories to swap and insights to share. It was a pleasant lunch — one I wish I could have lingered over, perhaps with a piece of pie. But it was getting late and I was supposed to be at a friend’s house in Wenatchee at 3:30. So we headed out, stopping to pick up two pounds of blueberries along the way.

I took the road on the east side of the river on the way back to avoid the traffic in Chelan, Entiat, and Wenatchee. It was a quick 50-mile ride to the south bridges between East Wenatchee and Wenatchee. Two more traffic lights and I was winding my way up Squilchuck Canyon, back to my temporary home in Wenatchee Heights.

The Teachers’ BBQ

By the time I got into the Mobile Mansion, it was 3:26 PM. I texted Kriss, who I was supposed to meet in 4 minutes to let her know I’d need at least an hour. That was fine; we weren’t due at the BBQ until 5 PM anyway.

I cleaned up, dressed, and threw the blueberries into a cooler bag. I still needed to get the other ingredients for what I planned to bring to the BBQ: strawberries, whipped cream, and cake. But when I got down to Safeway, there wasn’t a single strawberry in the store. I wound up with a single package — the last one! — of raspberries. And frozen whipped topping. I did get a good deal on a July 4 themed serving plate, which I’d leave behind with my hostess.

At Kriss and Jim’s house, I assembled my fruit and cream and put it in the serving dish. Kriss gave me some red sprinkles to dress it up. I was disappointed at myself for not bringing something better. (I’m really looking forward to having a full kitchen again.)

I met Kriss and Jim’s daughter and husband. I gave Jim the nuc box and frame holder I’d gotten as a little gift for him. (I met them through beekeeping; Jim has four hives and has been going out catching swarms lately. My first bee hive is in their backyard until I close on my Malaga property later this summer.) I watched at their three kittens, two of which are just staying with them temporarily. I unwound from the frantic pace I’d been keeping all morning.

We all headed out to a friend’s home about a mile away. It was an annual July 4 BBQ where Kriss’s fellow teachers — some still teaching, others retired — gathered for burgers, grilled salmon, excellent sides, and dessert. I met a lot of new people and answered a lot of questions about my cherry drying and other flying work.

The BBQ wound up after 7:30 PM. I said my thanks and goodbyes and climbed back into my truck. I was exhausted from my day out and stuffed from a good meal. I wanted to go see the fireworks but had no desire to deal with the traffic. A nice evening back home might be a good end to the day…

The Spoons Party

But I passed right by another friend’s house on my way home. Shawn and his wife were hosting the BBQ that Brian had gone to. I’d been invited but had turned it down to attend the other BBQ with Kriss and Jim. Was the party still going on?

I drove past and discovered that it was. I parked and walked around back to see what was going on. My rafting friends — as I’d begun to think of them — were playing a card came I’d heard about on my last rafting trip with them. It involved collecting four of a kind and grabbing a spoon off the table. There were five players and four spoons. The person who didn’t get a spoon lost.

A silly game, but nonetheless, I pulled up a chair and another spoon was added to the table. I didn’t play very well at first, but got slightly better. The vodka may have helped.

This party had kids — four of them — and later had fireworks out on the street. The whole area, in fact, was full of fireworks. Fireworks are legal in Washington — at least this part of Washington — and were readily available all over the place. Shawn and Brian had bought a bunch. When it got dark enough to enjoy them, they put on a show out in the street. Family fun.

When they broke up and headed back to the backyard, I took my leave. It was about 10 PM and I’d had enough for one day.

Bees: Capturing My First Swarm

I lucked out. It was very easy.

I started my beekeeping hobby in June 2013 and have been blogging about it periodically. If you’re interested in reading the other posts in this series, follow the Adventures in Beekeeping tag. Keep in mind that the most recent posts always appear first on this blog.

The call came while I was hovering over 35 acres of cherry trees in Monitor, WA. It was my friend Katie, who lives in Quincy. The bees that live in the wall inside the shop at their home had swarmed again. They were gathered in a bunch on the maple tree, about 8 feet off the ground. Did I want to catch them?

Of course I did!

My only problem was that I was working — with no end in sight. I spend my summers as a cherry drying pilot and I was into what would become a hellish week of rain and lots of hard work. I was hovering over one orchard when she called and another was already waiting for my attention. I told her I’d get there as soon as I could, thanked her for her patience, and hung up.

About Bee Swarms

Before I go into the story of this capture, let me take a moment to educate readers about bee swarms.

Honey bees live in hives. They could be manmade hives like the one I (and countless other beekeepers) have. Or they could be hives built inside of structures not intended to house bees, like hollow trees, rock overhangs, or building walls.

Most hives have a finite amount of space in which to build. Bees exist to reproduce and increase their numbers. Everything they do is to meet that end. (The honey they make is really for their consumption, not ours. They just make a heck of a lot more than they need.) So they’re constantly building inside their hive, making wax cells for brood (eggs laid by the queen and the larvae they turn into) and the storage of food like nectar (which turns to honey) and pollen.

As the hive population grows, the bees eventually start running out of space. They realize this and instinctively plan to split the colony. First, they create queen cells, which are special large brood cells for raising queens. The existing queen lays an egg in each of these cells, as she does for all the other brood cells. The workers, however, raise the larvae in these cells to be queens by feeding them royal jelly. (All larvae are started on a diet of royal jelly, but only future queens get it throughout their development.) Workers raise queens when they sense that the current queen is ready to die or already dead or when they know they need to swarm. The positioning of the queen cells helps beekeepers determine what’s going on; swarm cells normally appear at the bottom of the hive while supersedure cells appear near the top.

Bee Swarm
The swarm I caught looked a lot like this one. Wikipedia image by Mark Osgatharp.

Before the new queens emerge from their cells, the existing queen leaves the hive with at least half of the bees. They’ve already stuffed themselves with food so they’ve got enough energy to make a journey. This is the swarm. The bees stay close together, surrounding the queen to protect her. They leave the hive and often fly to a nearby location where they alight as tight mass on a branch or building eave or some other surface. They’ll remain there to rest and organize and get their bearings. Scout bees might fly off in different directions, looking for a new home. Eventually, the swarm will take off and fly in a bunch to a possible future homesite or another rest stop.

In general, when honey bees are swarming, they are least likely to sting. Why? Well, they don’t have a hive and food stores to protect. They’re on the go. Their only concern is protecting the queen and moving her into a new home so she can continue laying eggs and building their population.

Capturing a swarm is a win-win-win-win situation:

  • The property owner wins because she gets the bees removed for free.
  • Society wins because the bees are kept alive rather than killed — as an exterminator might do. Bees are vital to agriculture and the food chain.
  • The bees win because they’re not only kept alive, but they’re given a great new home all ready for them to move in — a manufactured hive, designed with their needs in mind.
  • The beekeeper wins because she gets a whole colony of bees, including a queen, for free.

Wikipedia, by the way, has an excellent article about honey bee swarming.

My Swarm Capture

I finally finished flying for the day at around 6 PM. I wasted no time loading up my beekeeping gear, which I keep in a rolling storage box, and the empty nuc box I’d gotten my first been colony in. My friend Cheryl climbed aboard the truck with me and we drove the 10 or so miles to Katie’s house.

Katie, by this time, was gone. She had to take her son to a swimming meet (or ball game or something like that). Her other son was home. He came out when we pulled up with the truck. The swarm hung from a branch on a maple tree beside their driveway. It was about 10 feet off the ground. But because it was overhanging the driveway, I could back my pickup’s bed under it. Standing on the pickup bed didn’t get me close enough to reach it, but standing on that big plastic bee equipment box in the back of the pickup did. (I really don’t like climbing ladders.)

I suited up and took a closer look, climbing up until my face was less than a foot from the swarm. They clung to a pair of small branches. I knew from conversations with other beekeepers that capturing a swarm like this was often as simple as clipping the branch off the tree and putting the bees in the box. So that’s what I did.

Capturing a Swarm
Cheryl took this photo of me lowering the bulk of the swarm into the nuc box.

I removed three frames from the 5-frame nuc box. Katie’s son got me a pair of clippers (note to self: buy clippers and put in bee box) and I climbed back up atop my equipment box. I grasped the branches right above the top of the swarm and clipped them right above my fingers. I then lowered the branch into the box. That took care of about 80% of the bees. I repeated this process for another small branch. Unfortunately, a clump of bees fell off and landed in the bed of my pickup. I had to scoop them up manually with some cardboard to get them in the box. When I was done, I had about 98% of the bees. A few dozen were flying around.

Captured Swarm
The captured bees wasted no time crawling up onto the frames in the nuc box I put them in.

I looked into the box. There was plenty of space in there to add a frame, so I gently lowered one in.

By that time, Katie’s husband had come out. He, his son, Cheryl, and I took a close look inside the box. We could clearly see “fanning” activity by a handful of bees on the top edge of the box. I’d seen this behavior before when watching another area beekeeper catch a swarm. The bees were trying to spread the queen’s scent outside the box to attract other colony members who hadn’t come into the box yet. That’s a great indication that the all-important queen was inside the box.

I took off my suit and stowed it in my equipment box, along with my smoker (which I hadn’t needed) and gloves. I waited as long as I could to cover the nuc box.Most of the bees were inside the box; the ones left behind might find their way back to the original hive in the shop wall less than 100 feet away. The plug for the hive entrance had already been put in place so the bees inside the box were trapped there. I wedged the box into a safe spot in the back of the truck, said goodbye to Katie’s family, and left.

Settling in the Swarm

Back at my RV, I offloaded the truck, leaving the nuc box on top of the bee equipment box under my fifth wheel hitch overhang. Then I took a quick shower, dressed, and went out with Cheryl to meet some friends in town.

The plan was to take the bees with me the next day when I moved my RV to Wenatchee Heights. Unfortunately, the weather didn’t cooperate. I had to fly most of the morning. If I left the bees closed up in the box, they could die from heat or lack of water. So I took the door plug off. Bees started coming and going like a regular hive. This meant that I would not be able to move the bees until that evening, when they returned for the night.

Although I did manage to move my RV that evening, I also had to fly. By the time I was done, it was too late to retrieve the bees. I asked Mike and Cheryl to close up the door, planning to retrieve them in the morning. But when morning came, I had to fly again. So they opened the door to let the bees out another day.

This turned out to be a tiny problem. Although I’d paid for my RV space through the next day, the campground people put a motorhome in that spot. The bees were coming and going from their box under the picnic table. The motorhome people were terrified of them and stayed locked up in their luxury box. The campground people called to ask when I’d get the bees. I was flying when they called. I assured them I’d be there later that evening and hoped (again) that the rain would stop.

Temporary Home
My new bees in their temporary home. I hope to have them moved into a real hive later this week.

Fortunately, the rain did stop and I did get back to Quincy to retrieve my bees and other possessions left behind. I brought everything back to Wenatchee Heights, where I’m currently camped out between two of the orchards I’m contracted to dry. In the morning, I opened the door to the hive. The bees began coming and going as usual, probably wondering what the heck was going on.

Several days have gone by. The bees seem happy enough. I’ve ordered a new hive to put them in; it should arrive sometime this week. I’ll set that up here, remove the frames from the nuc box and put them in the new hive, and get the nuc box ready for my next swarm capture. Details to come (of course).

Bees: My First Hive Inspection

I open my new hive for the first time to see what my bees are up to.

I started my beekeeping hobby in June 2013 and have been blogging about it periodically. If you’re interested in reading the other posts in this series, follow the Adventures in Beekeeping tag. Keep in mind that the most recent posts always appear first on this blog.

I set up my first beehive and loaded bees into it on Tuesday, June 4. On Tuesday, June 11, I went back to inspect the hive.

Hive inspections are something beekeepers should be doing about once every 1-2 weeks during the productive summer months. The idea is to check the health of the colony, remove things that shouldn’t be in there, and get a general idea of what the bees are doing in their box(es).

Preparing for the Inspection

To prepare, I looked up a few checklists online. I wanted a guideline that would help keep me focused on what I needed to do so I could minimize the amount of time the hive needed to be open. I found two good ones:

  • Hive Inspection Sheet is a great one-page checklist to record information from an inspection. This is the sheet I wound up using, even though it includes many items that I didn’t need for this inspection.
  • Hive Inspection Checklist comes with 7 pages of information to help you understand what you’re doing and how to do it. Although I didn’t like the actual checklist format, I found the accompanying explanations extremely valuable.

I also made notes in a looseleaf book I’ve been using to keep track of things I need to remember. (Seriously: the memory loss that goes with aging and having a very busy life sucks big time.) I divided it into two parts:

Prep:

  • Hive body. I needed to put the second hive body in the Jeep so I wouldn’t forget to bring it.
  • Smoker setup. I wanted the smoker all set up with ignition paper and fuel so all I had to do was light it.
  • Food. Didn’t want to forget the sugar syrup I’d prepared.
  • Camera charged. I was bringing along my GoPro to document the inspection and I needed to make sure it was fully charged.

Tasks:

  • Light smoker. Seriously, I even need to remind myself to do something like this.
  • Open hive. Duh-uh.
  • Remove frames one by one and check:
    • Brood development. Are there larvae? Capped brood cells? The health of the colony depends on a constant inflow of new bees via hatching.
    • Eggs. Is the queen laying eggs?
    • Honey / Pollen. Are the bees making honey? Storing pollen? They should be!
    • Queen Cells / Drone Cells. These are brood cells for queens or drones. They are larger than regular brood cells. I didn’t expect (or want) to see queen cells — one queen is enough and the presence of queen cells indicates either an unhealthy queen or the possibility of swarming. Drone cells should be present, but not in great numbers.
    • How many frames are full? The bees should have filled out their original five nuc frames and begun work building out comb and filling it on the additional five frames I provided in their hive.
  • Add hive box on top. Only if they’d made good progress on the five new frames.
  • Close hive. Duh-uh.
  • Feed bees. I needed to refill their feeder with the sugar syrup.

My notes were the bold text. I didn’t need the explanations. (Those were for you, dear reader.) Not a huge amount to do or remember. Just right for this first time.

I also printed out the checklist. I’d fill it out when I was finished.

The Inspection

I had a great day on Tuesday. Very relaxing. I blogged about it here. By the time I got to Jim and Kriss’s house in Wenatchee, I was feeling good. Very mellow and relaxed. In no hurry. And I stayed that way. That’s really important when you’re working with at least 10,000 live bees.

Hive Inspection PhotoI arrived around 4 PM, when the temperature was around 70°F. A nice warm afternoon when many of the bees would be out foraging. I brought my gear into what I’ve come to think of as the “bee yard” and was happy to see bees coming and going through the hive entrance. I saw Jim and Kriss and Jim came in to keep me company. I lighted the smoker and suited up. Jim remained in plainclothes, but stood back as I got to work.

Rather than give you a blow-by blow of the inspection, I’ll let you watch the video. It’s 9 minutes long, edited down from 30 minutes of raw footage. It was shot with a GoPro camera on a tripod. (I’ll do this again in the future and talk more directly to the camera.) Throughout the video, you’ll hear Jim and me talking about what we’re seeing.

Here’s the video:

The long and the short of it is that I have a healthy hive with friendly bees. Did you notice how Jim gets closer and closer throughout the video until at one point, he sticks his bare finger right next to the hive? My bees didn’t mind. They’re mellow. Mellow yellow bees. Jim says his bees aren’t that nice.

We saw drones and I actually spotted the queen, which surprised me very much. Jim and I seemed to see her at the same time.

We did find one swarm cell — a queen cell near the bottom of the hive. They likely built this before the frames were put into the hive, thinking they were running out of space in the nuc (which they were). I removed it.

We didn’t see any eggs, but we did see plenty of developing larvae and capped brood cells. And tons of honey and pollen.

I got to scrape clean honey comb off the top of the inner box. I munched on it later in the car. Next time, I’ll bring a container just for my spoils. I’ll be leaving most of the honey for the bees this year — they’ll need the stores for the winter.

Next Inspection

My next inspection will be about 10 days after this one — sometime next week. I’ll do pretty much the same thing, but this time I have the challenge of working with two boxes full of frames.

I’ve been giving my frame setup a lot of thought. I’m thinking that I want to reconfigure the hive to have just one deep frame on the bottom and then mediums above it. I’ll still allot two hive bodies for brood, but I think that having medium bodies/frames above the hive will give me more flexibility for honey production while making the hives lighter overall. And I’ll still have the deep boxes on bottom for installing or creating nucs. Of course now that I’ve already put the deep box on top, I can’t really make any change until I get a second hive setup and either split the colony or use the occupied frames from the top box in a new hive. Neither is possible right now.

I’m also thinking of putting in a frame with beeswax foundation might be a nice way to harvest a single frame of honeycomb before winter. I think the bees can spare that for me — especially given the amount of sugar I’ve been feeding them.

More video — but shorter and more pointed — with the next inspection. As usual, your comments and feedback here is always welcome.