Prepping for Winter

I get started on my winter preparation chores.

Thought I’d write up a quick blog post to review a few of the things I did yesterday to prep for winter and maybe list a few that still need to be done.

Winter in Wenatchee

I should start off by saying that winter in the Wenatchee area, where I live, isn’t as cold and nasty as you might think. Yes, Washington is in the northwestern corner of the country and I live at about 47.4° of latitude there. But as surprising as it might seem, our winters are just about the same as the ones I experienced in Northern New Jersey years ago, which sits at about 41° of latitude. Here’s some data from Sperling’s Best Places:

Climate Comparison

I’m finding it hard to believe that we have fewer sunny days than the New York Metro area, but that’s likely due to the winter when we get cloud cover 4 out of every 7 days (my estimate). In the rest of the year, it’s sunny most days. The rainfall numbers (8.8 annual inches in Wenatchee vs. 42.6 in Harrington Park) and precipitation days (64 vs. 113) tell the tale. We even get less snow.

One of the two main reasons I left New Jersey back in 1997 was to get away from the cold winters. (The other was financial; I can have a much better lifestyle out west for the same or less money.) So I think it surprised a lot of people when I made the move to Washington State. But there are a lot of things beside the weather to attract and keep me here — I’ve mentioned a lot of them elsewhere in this blog.

Still, the weather does dip below freezing in the winter here and, like in Arizona, it does it earlier than it did back east. It seems that the coldest days here are right around Christmas. (Back east, it started getting coldest around New Year’s day and didn’t let up until mid February.) I’ve experienced freezes here as early as November, which is why I start winterizing as soon as we get our first frost.

That was this past Tuesday morning.

Irrigation

Because of our “high desert” like environment, the only way to get a garden or leafy trees to grow is to put them on irrigation.

I’m a real pro at setting up drip irrigation — I did it at my Arizona home not long after we moved in and were able to do some sort of landscaping there. (Long story; not worth retelling.) The benefit of drip irrigation over sprinklers is that you can bring water directly to the plants that need it. That saves water and cuts down on weeds.

I have four irrigation systems at my Washington home:

  • My vegetable garden was the first one I set up. It runs from a battery-operated timer and provides water to the raised garden beds, a flower garden beside my shed, and the flower garden at the entrance to my driveway. I also ran the line under my driveway to deliver water to the first trees I planted on the south side of my driveway, including a handful of fruit trees (cherry and apple).
  • My front lawn was the next one. The only reason I have a lawn is because my dog likes grass. The lawn is small and is bordered by rocks and my driveway on three sides and a row of lilac trees I planted right in front of my home on the other. This system also runs on a battery-operated timer and it includes three pop-up sprinklers in the law and a bunch of drip lines for the lilac bushes and some marionberry bushes a friend gave me.
  • Two professionally installed irrigation lines on a programmable 4-zone timer provide water to the trees I’ve planted along the road and all the way down in my bee yard. I have over 1,000 feet of road frontage and the lines run almost that entire length. I add drip emitters every time I plant another tree.

The main thing to worry about with irrigation lines in the winter is that if you don’t drain them, they’ll freeze and possibly crack. That means tracking down leaks and doing a lot of repairs in the spring. I obviously want to avoid that.

Over the past couple of weeks, I’ve been cutting back on the water being delivered to my garden, lawn, and trees, mostly by adjusting settings in the irrigation systems. When the weather finally turned full autumn last week, I shut most of them off completely. A friend in the area suggested giving everything one final soaking before winterizing. Mother nature is doing that for me: there’s a double storm system coming through the area that should be delivering lots of rain. So I shut everything down yesterday and winterized it.

What does winterizing entail? Here’s what I do:

  1. Shut off the water source at the source. Three systems run from the “frost free” valve at my shed; the one from my lawn is a spigot at the front of my house. which has an internal shutoff valve.
  2. Disconnect the water lines. This makes it easier for them to drain. Or for water to expand if there’s any left in the water line and it freezes.
  3. Use an air compressor to blow out the lines. I bought all the equipment to do that last year: male and female hose fittings that can connect any hose fitting to my compressor. My compressor is a huge affair on wheels that my friend Bob gave me. I have it connected to a very long hose (also from Bob) on a reel I bought and installed my car garage. The hose is long enough — if you can believe this — to reach my shed about 100 feet away from my front door. So it took only minutes to run the compressor hose out there, hook it up to the various lines, and blow out each line. Then I cranked the compressor hose back in. Done.

Th only other thing I need to do is gather up and drain the hoses I’ve used around my yard, coil them back up, and store them in the shed until next spring. I’ll likely do that next week when the weather clears up again. They’re not at risk of freezing.

Water source
This Frankenstein’s monster is where the water comes into my building and goes all kinds of places — including a hose for the inside of my garage. I designed this crazy setup so I could actually drain all the water out of my pipes from one place.

Inside my garage, under the stairs where the water comes out of my slab and goes up into my home, my water lines also need a bit of prep. That’s easy. I have a ceramic heater that I place in front of the PEX pipes. I plug that into a Thermo Cube — a temperature sensitive outlet that turns on at 35°F and turns off at 45°F. So if temperatures get down to freezing inside my garage — which is possible once in a while — the heater will turn on and keep that area warm. No chance of pipes freezing.

The Garden

My vegetable garden this year was better than ever before. Until the tomatoes took over.

I planted and harvested sugar snap peas, beans, broccoli, brussels sprouts, peppers, onions, okra, eggplant, beets, corn, zucchini, yellow squash, cucumbers, various herbs, and potatoes. Everything except the brussels sprouts provided me with a good harvest. The sprouts were attacked by aphids and grasshoppers that I was simply unable to keep under control. The zucchini, yellow squash, and cucumbers were attacked by squash bugs, but I managed to get a good harvest before they came.

My Garden
Here’s my garden in the spring, before the tomatoes and sunflowers took over.

I also planted just four tomato plants. Unfortunately, some “volunteer” tomato plants also started growing. These were from seeds of tomatoes that had fallen to the ground, likely at the end of the previous season. At first, I pulled them out. Then I potted some and gave them to neighbors and friends. Then I pulled more out. Then I thought, well, what’s a few more tomato plants?

I went away for a week in the beginning of August. When I got back, those volunteer tomato plants had pretty much taken over one side of the garden, making it impossible for me to reach the second batch of corn that I wanted to harvest.

And then the spiders moved in. Big yellow and black ones that an entomologist friend assures my are not harmful. There were at least two that I saw. Who knows how many more lurked in the jungle of tomato plant leaves? I made sure I always wore gloves when picking tomatoes.

And then I started taking pruners with me when I picked tomatoes. Ever time I picked a basket full, I’d lop off huge branches of the plants. I eventually regained access to my eggplant plants, which began producing again. The peppers were a complete loss, as was the corn. If my chickens hadn’t met an untimely end, they’d likely be eating back the plants. But because they’re gone, the tomato plants soon invaded the fenced-in chicken yard.

Out of Control Garden
Out of control tomatoes and sunflowers in my garden. At this point, I’d already harvested much of my garden’s crops.

I should mention that there comes a point when your neighbors and friends stop taking tomatoes from you and you feel as if you eat another bowl of gazpacho, you’ll die of tomato poisoning (if there is such a thing).

When the frost set in the other day, I have to say that I was glad to see frost damage on some of those plants. I’d finally get rid of them.

But I will eventually have the task of cutting them all back and putting the plants in a compost pile. I’ve already been doing this a bit with grass clippings and other tomato plant cuttings. I put them in the raised planters I’ve already harvested from. When the snow falls, it’ll form a heavy blanket over each planter’s pile. Snowmelt will help break down the plants. In the spring, I’ll just use a rake to loosen up the previous year’s soil and new compost. Then I can add a half bag of fresh garden soil, work it in, and plant.

This year’s chore will be difficult. As soon as the frost kills the plants, I’ll get to it. I figure an hour or two a day through the rest of October will finish it up.

I almost forgot about the invading sunflowers. They grew all over my garden area and at the corner of my front walkway. They’ve been dying and I’ve been pulling them out for the past month or so. Still have a few to go. They go down to my big yard waste pile, which is a low area alongside the road just past my windsock. The quail are having a field day on the seeds that are dropping. I guess I’ll be fighting sunflowers next year, too.

Potatoes from my Garden
The last of the potatoes from my garden.

In the meantime, I harvested the rest of my potatoes yesterday. This was the first time I’d ever grown potatoes and I started with a few from my pantry that had grown “eyes.” I followed the instructions I found on the web and put them in their own pallet planter. I never put that planter on irrigation — I just watered it occasionally. Next year, I’ll irrigate; I think I’ll get more potatoes that way.

The Lawn

Bad Lawn
Here’s what part of my lawn looked like this spring. The top part of this photo shows the dead grass raked out; the bottom shows what long grass looks like if left under snow for months at a time. Lesson learned.

I learned my lesson about the lawn this spring: if you don’t cut the grass down short before the snow comes, you’ll start the season with an ugly brown patch that requires a ton of raking to prepare for spring growth.

Even though I’ve turned off the irrigation, my lawn continues to grow — although more slowly than it did in the summer. So I’ll keep cutting it.

It’s not a big deal because it’s a small lawn. I have an electric mower that works very well. The whole job takes about 15 minutes, including prepping the mower and then dumping the grass clippings and putting the mower away when I’m done. I suspect I’ll keep at it until either the first snow is forecast or I go away for the winter.

My Lawn
Here’s what my lawn looked like this summer. Not perfect, but I’m proud of it. It’s the first lawn I’ve ever planted, grown, and tended to in my life. (And yes, that is a pesky volunteer sunflower along the gravel area.)

My Cheat

Oh, yeah — maybe I should have admitted that at the top of the post: I don’t stay here for the winter. I actually never intended to — even when I first saw this homesite and knew it was what I wanted. As far as I’m concerned, this is a three season place. When the temperatures begin to drop and that cloud cover moves in like a cold winter blanket, I’m out of here, headed to points south: Arizona and California.

I’m lucky to have a very good house-sitter who comes with her Doberman to keep an eye on things for me. She’ll be here for most of the time I’m gone and has family nearby to help her if anything goes wrong.

Still, I want to prepare my place so it’s easy for her to tend to — and worry-free for me. That’s why I winterize.

Construction: The Windowsills

Something a little different for a different kind of home.

On May 20, 2014, I began blogging about the construction of my new home in Malaga, WA. You can read all of these posts — and see the time-lapse movies that go with many them — by clicking the new home construction tag.

I’ve been living in my new home for about a year and a half now and although I’ve had my Certificate of Occupancy since this past spring, I’m still not quite done with the finishing touches. The windowsills were one of the projects I recently finished. I documented my work with video as I finished up.

The Backstory

Most people have their homes built by builders who are managed by a general contractors. At the end of the project, the general contractor hands over a set of keys to a finished home. For my home, I was the general contractor. Whatever I didn’t hire someone else to do, I had to do myself. While this saved me a bunch of money, what’s better is that it gave me an opportunity to add custom design elements that most general contractors couldn’t be bothered with. My windowsills are a very good example of this.

My building is a “pole building” built with post and beam construction. That means the building’s frame literally hangs on a series of thick, pressure-treated 6×8 or 8×8 posts. When the framers came to frame the inside of my living space, I had two options: frame just the inside walls and allow those wooden posts to appear on inside walls or frame the entire living space so the drywall would hide those posts. The posts weren’t very attractive, so I chose to hide them. This means that they had to frame a secondary wall inside the outer wall, creating a relatively wide space between the inner and outer walls. This was great for insulation purposes — I could fit much thicker insulation in that wall than was required by building codes. But it also left deep wells at each window.

Framed Windows
This photo was shot back on December 29, 2014 when I was working on interior wiring. It’s a pretty good illustration of how the framers framed my interior walls inside my building shell. This is my living room; my TV is currently in that corner.

Insulated Wall
This is one of my living room windows after the insulation was put in place in mid January 2015.

When the drywall guys came, I had two choices. I could have them drywall the entire window well, including the bottom part, or I could leave the bottom part unframed and install wooden windowsills later on. I thought back to my old home, which used the first method for its relatively shallow window wells. When windows were left open in the rain or windows leaked — which was a problem with one window not long after we bought the home — the drywall windowsill was damaged and required a professional drywall guy to patch. I wanted to avoid that, so I went with installing wooden window sills later on. I should mention that my four clearstory windows, which are high on my south-facing walls, do have finished drywall window sills. But they’re rarely opened so I’m not worried about damage.

Drywalled and Painted
Here’s one of my living room windows on February 15, 2015, not long after being drywalled and painted. (If you’re interested in seeing what the drywall work looked like as it was being done, be sure to check out the walkthrough video in this blog post. And this blog post includes a video of my kitchen, after installation but before the windowsills were installed.)

So this was what I was left with. Ugly, huh?

The Solution

My first attempt at wooden windowsills used 1×10 and 1×12 lumber that I cut to fit. This turned out to be a difficult job, mostly because the framer (and the dry wall guy) hadn’t created uniformly sized or shaped window wells. Getting the wood to fit perfectly and look good was a nightmare and, as you might expect, I procrastinated about getting the job done. When I finally did it, it looked like crap — at least in my opinion. I started regretting the wooden windowsill decision.

First attempt at a windowsill
This is my first attempt at a windowsill back in March 2015 — it’s the original one in my office area. There were no right angles in the window wells, making cutting the wood to fit perfectly nearly impossible.

Time went on. I cut wooden planks to fit most of the window wells as best as I could. I didn’t like the way it looked, but it looked a lot better than nothing at all.

More time passed. Lots of time. My friend Don built a custom wood cap out of driftwood logs for my stairwell that got rave reviews from everyone who saw it. I asked him to build some furniture for my living room: end tables, a TV table, and a coffee table. He used reclaimed wood and left natural edges. He finished everything with tung oil. They looked great; you can see them in a video in this blog post. He told me about some logs he’d had planed into planks. I talked to him about my windowsills. He asked me how many planks I needed. I told him eight — one for each of my great room windows. He came by one day and delivered 8 raw planks of wood.That was sometime in the autumn of 2015; I don’t know the exact date because I don’t have a photo of the delivered stack of wood, which lay across a pair of sawhorses in my garage. For months.

The trouble was, I didn’t know what to do with the wood. So when Don asked me this past summer how the project was going, I told him I was waiting for his help. So he set a date in July and when that date rolled around, we got to work.

The Job

Don did the first two windowsills for me, start to finish, while I watched and learned.

Wood Plank
A typical wood plank. We began working it by closing up cracks, then cutting off a live edge for the back of the windowsill, trimming its length, and shaping its front edge.

Repaired crack
One of the cracks after gluing it. After scraping away the solid foam and sanding it, the crack disappeared.

The process began with repairing cracks in each piece of wood. The wood had arrived wet and had been stacked horizontally on sawhorses with each row of planks separated by some scrap lumber so they could dry. Cracks along the grain had formed in some of the logs. Don wasn’t concerned. He’d already developed a workable solution for this problem, which he encountered quite often. We wet down both sides of the crack, filled it with Gorilla Glue, and then used clamps to close up and hold the cracks together. Overnight, the glue would set, leaving orangish solidified foam on the outside, That would be scraped away and sanded down with the plank later in the process.

Then we needed to match a wood plank to a window. The planks were all longer than they needed to be, but they came in two basic widths. The wide ones needed to be used for the five north-facing windows while the narrower ones could be used for the east-facing windows, which weren’t quite as deep. We had to pick which side should be the top and which edge should be on the outside, facing the room.

Then Don made a template out of cardboard pieces for a specific window. This had the exact length, including the weird angles, and the depth, including the outer edge. We’d bring that downstairs and he’d lay it on the chosen plank, outline where he needed to cut. Then, using a circular saw, he’d cut off one live edge of the wood to form a straight back edge. He’d also trim the length of the plank and then, using the circular saw and a handsaw, cut the shape of the front with an overhang past the edge of the windowsill area.

Then we’d go back upstairs to see if it fit. And back downstairs to make some adjustments. And back upstairs to see if it fit. Repeat as necessary. When Don was satisfied, we came back downstairs to finish the live edge. That required using a special cutting tool to carve away the bark and shape the exposed edge of the wood. This is where it got artistic and Don did a fine job (as I expected). Finally, he used an orbital sander to sand the top and outer edges of the plank.

When it was just the way he wanted it, we brought it back upstairs, fit it into place one more time to be sure, and then removed it. Rather than use screws or pegs to affix it into place, he took out his trusty Gorilla Glue and spray bottle, moistened the wood, applied glue to both the unfinished windowsill area and the bottom side of the new windowsill, and slipped it back into place. We used a combinations of rags for padding and lengths of wood to hold the windowsills down until the glue could cure — at least 12 hours.

Don did two of these that first day. I paid close attention. He came back the next day and did the rough cuts for a few more, leaving all the finish work to me. A week later, he dd the last two. I paid him for the wood and his time. The rest was up to me.

Two Windowsills
This photo shows two of my windowsills. The one on the left was completely finished and installed by Don. All it needed was to be oiled. The one on the right is cut to size but not finished. I had to carve out the live edge (removing the bark) and sand it down before gluing it into place.

With the window framing exposed again — we’d taken off my makeshift windowsills — I was motivated to finish up. So although I had a bunch of other stuff going on — including the end of cherry season and a vacation in my new truck camper — I went to work at it and eventually got it all finished up. Along the way, I shot some video clips of the work I had to do. I put them all together in this video, so folks could get an idea of what had to be done. It’s a little long, but it covers all the steps I took.

By the way, I’m finding that creating and saving these videos in my blog is a great way for me (and others) to look back on the progress I’ve made in building my home. As I wrote this blog post, I stopped to watch some of the videos I linked to here. It was not only great tp see things partially done again, but interesting to hear my narration of plans — some of which changed over time. What a great way to document the evolution of this challenging and lengthy project!

Banking Stupidity

Yesterday’s snafu, which cost me about 3 hours of my life.

I hate when things don’t work the way they should — or even the way you’re led to believe they should. That bit me yesterday and caused a time suck for me. Here’s the story.

I recently moved all my banking to a local bank with branches throughout the state. I was tired of dealing with the mobile app deposit limits imposed by my business and personal banks (BofA and CapitalOne 360 respectively), neither of which had local branches. I figured that having all my accounts in one bank would make it easier for me to do my banking. And I found a bank I really liked, one where I was greeted with enthusiasm when I walked in and gave me service beyond my expectations. One with the online banking, bill pay, and banking by mobile app features that I needed to simplify my financial chores.

All Accounts in One Place
How refreshing to be able to see and work with all of my bank accounts in one place.

I set up the business accounts first and then the personal ones. To access all of my accounts via online banking, they set me up with their Business Manager system. I could see and work with all of my accounts (two checking and two savings) with one login. I could even easily (and immediately) transfer funds between accounts to handle surpluses and shortfalls in my checking accounts. All good so far.

I immediately set up my bill pay information for business and personal bills. I even set up e-bills and auto-pay, which would automatically pay bills on time without me having to remember to set up a payment. I’ve used this capability with online banking for years and it’s a great tool for anyone with a busy life, especially if you travel as often as I do. When I set this up, I was very careful to use the correct checking account for each payee — business bills to be paid from my business account and personal bills to be paid from my personal account.

So imagine my surprise when I got a letter from Premera Blue Cross saying they’d rejected my premium payment because they don’t allow payments from business accounts.

I wasted about 15 minutes confirming that I’d set up the autopay to pay from the correct account. I had.

I wasted another 5 minutes confirming that the payment that had been sent in September was sent from the correct account. It was.

I then spent a total of 30 minutes on the phone with Premera, most of which was on hold — of course — to tell them that they were wrong, that the payment had come from a personal account. They told me that the payment instruction — this was an electronic payment — indicated that it was from “Flying M Air L.” I had to explain at least three times in three different ways that it was a personal account held in the same bank as my business account. (Being on hold for so long put me in a pissy, frustrated mood that got me shouting at the guy and didn’t help my blood pressure reading when I stepped into the doctor’s office 20 minutes later.) The Premera customer service guy told me he’d start an investigation with the accounts receivable people but I was okay for now since my account was paid up for the month. He’d call back (which of course hasn’t happened yet.)

Later, I spent another 20 minutes on the phone with my bank’s customer service department. After not being able to figure out, at first, what was going on, they eventually told me that since I’d used a business log on to create the bill pay instructions, any payments would indicate that they came from my business no matter which account I used. If I wanted payments to show my name instead of my business name, I’d have to create a personal account login and use the personal banking app to manage payments. Fortunately, this wouldn’t change my ability to see and work with all of my accounts from the business login. I just couldn’t create personal payment instructions there.

So this morning, I spent over an hour recreating all of my payees and payment instructions on the bank’s website for personal accounts. And deleting those same instructions from the bank’s website for business accounts.

It’s dumb and its frustrating but at least (I think) it’s fixed.

Now don’t get me started on the bank websites’ crappy user interfaces.

But despite all of this stupidity, I am much happier with my current banking setup. Honestly: why did I wait so long to make this change?

Home Tour, 8-Oct-16

Another look at my work-in-progress home.

On May 20, 2014, I began blogging about the construction of my new home in Malaga, WA. You can read all of these posts — and see the time-lapse movies that go with many them — by clicking the new home construction tag.

I had a friend I hadn’t seen for about a year come over for dinner on Saturday night. It was a good thing he came. I had a few little projects that I’d been putting off for two long — the trim around my bathroom door being the biggest one — and knowing he was coming motivated me to finish them. It also motivated me to clean the place up and throw away a lot of the junk that had been accumulating. I am the queen of clutter and I’m really working hard to control it.

My Red Sofa
I get very serious when I clean. I even took out the leather cleaner and wiped down my living room sofa.

Once my home was all spiffed up, I figured I’d take the opportunity to do a quick video tour. I’ve been videoing various parts of my new home construction and it’s kind of neat to go back through my archive and see where I was at various points.

My living space is about 95% done at this point. I have my Certificate of Occupancy — I got it last spring — so there’s nothing left to get inspected. There are three big finishing projects, though:

  • Build a ladder to my loft. I already have all the wood and hardware. I just have to stop procrastinating and get the job done.
  • Finish the tile around my shower stall. Again, I have most of the materials I need. I just absolutely detest working with tile. So I procrastinate.
  • Paint and trim the stairs. I’m going with paint because it’s durable and cheap. But I still have to sand the steps, paint them, and then add trim along the sides.

I also have some “baseboard” trim work to do. I’m using quarter round to keep it simple. There’s not much left to do. I might knock it off Monday afternoon.

Anyway, here’s the video. Enjoy.

Pressure Cooker Beef (or Oxtail) Barley Soup

One of my favorites, made quickly with a twist.

Oxtails
Oxtails, fresh from the butcher.

One of my favorite “comfort foods” is beef barley soup. I blogged my recipe last December; here’s the pressure cooker version that’ll get yummy barley goodness to your mouth quicker. But rather than use plain old stew meat, this time I used fresh oxtails that I picked up from a local butcher this past week. I whipped it up in my Instant Pot in about an hour.

Ingredients:

  • 1 tablespoon olive oil. The original recipe called for cooking spray. But why not use a little olive oil instead?
  • 2 pounds oxtails, trimmed (or 1 to 1-1/2 pounds stew meat, trimmed and cut into 1/2- to 1-inch pieces). You can make it with less meat, but if you have more, use it. It’ll make a heartier soup.
  • 3-4 large carrots, sliced. Carrots are a must-have in any meat-based soup.
  • 2-3 stalks of celery, sliced. I don’t care for celery, but it is part of the aromatic trilogy.
  • 1 large onion, chopped. The third member of the aromatic trilogy, I put onions in most soups and stews. I still have onions from my garden.
  • 1 large parsnip, sliced. If you can’t find parsnips, add another carrot or two, which is what I did today.
  • 1 medium turnip, cut into 1/2-inch cubes. I skipped this today.
  • 4 cups fat-free, low-sodium beef broth. Today I cheated and used water with bullion, which is the only thing I had.
  • 1 bay leaf.
  • 2/3 cup uncooked pearl barley.
  • 1/2 teaspoon salt. You can probably omit the salt if you don’t use low-sodium beef broth. I did, but then again, I’m trying to keep my salt intake down. Remember you can always add salt; you can’t remove it.
  • 1/2 teaspoon black pepper. Pepper is always good with beef.

Instructions:

These instructions are for an Instant Pot, but I tried to include generic pressure cooker instructions, too.

  1. Heat the pressure cooker for browning. On an Instant Pot, press Sauté.

  2. Heat oil in a heavy-bottomed pot over medium-high heat.
  3. Add oxtail or stew meat to pot and cook until browned on all sides.
  4. Remove meat from pot with a slotted spoon and set aside.
  5. Add vegetables to the pot; cook 6-8 minutes or until liquid almost evaporates.
  6. Return beef to pot with beef broth and bay leaf.
  7. Bring to a simmer and turn off the pressure cooker.
  8. Stir in remaining ingredients
  9. Cover and lock down the cover. Set the pressure cooker to high for 20 minutes. (On an Instant Pot, press Manual and set to 20.
  10. When pressure cycle is over turn pressure cooker off and allow pressure to release naturally. This should take about 15 to 20 minutes.
  11. Remove cover carefully, fish out bay leaf, and serve.

Oxtail Barley Soup
Oxtail barley soup. It was delicious!

Keep in mind that the longer you cook the pearl barley or let it sit in the hot soup, the more liquid it will absorb. The net result could be more of a stew than a soup. If you want a soupier soup, either reduce the amount of barley or increase the amount of broth.

This yields about six to eight servings, depending on serving size. I think it would be excellent with some crusty bread on a cold winter day.